Retired - Fancy Kitty Bobby Pins

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Place a dab of E6000 glue onto the back of a lucite round black and cream cat face cameo and press it into an antiqued brass bezel cup. Allow the glue to set for a few minutes.
2. Place a dab of E6000 onto the glue pad of a black enamel bobby pin and center it on the back of the bezel cup. Make sure that your cat face is straight, with the pin straight out to one side.
3. Allow the glue to dry for 24 hours before wearing.

• SPCB-4028 - Lucite Round Cameo Black With Cream Cat's Face 25mm (2 Pieces)
  Project uses 2 pieces. You will need 1 package.


• PND-2083 - Antiqued Brass Bezel Cup Cabochon Setting 26mm (2)
  Project uses 2 pieces. You will need 1 package.


• FCO-9050 - Black Enamel Metal Bobby Pins With 8mm Pad For Gluing (10 Bobby Pins)
  Project uses 2 pieces. You will need 1 package.


• XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
  Project uses 1 tube. You will need 1 package.