Retired - Fancy Floral Sweetheart Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Place a 4mm fuchsia Czech crystal bicone bead onto a head pin and create a simple wire loop about 3/4" from the top of the bead. Trim the excess wire.
2. Place another bicone bead onto another head pin and create a simple wire loop about 1/2" from the top of the bead. Trim the excess wire.
3. Place a third bicone bead onto a third head pin and create a simple wire loop about 1/4" from the top of the bead. Trim the excess wire.
4. Open the loop on an eye pin and place the three head pins with beads onto the loop; close the loop.
5. Onto this eye pin, place a lucite flower, the scroll bead cap, the petal beadcap, the daisy spacer, and a bicone bead. Create a wrapped wire loop after the last bead. Trim the excess wire.
6. Open the loop on an earring hook and hang the earring by the loop you just created. Close the earring hook.

• BCP-4332 - Lucite Bell Flowers Matte Ligtht Rose Pink Light Weight 20mm (4)
  Project uses 2 pieces. You will need 1 package.


• FEA-6640 - Vintaj Natural Brass Round Loop Ear Wire 25mm (2 Pair)
  Project uses 2 pieces. You will need 1 package.


• BMB-3243 - TierraCast 22K Gold Plated Pewter Daisy Spacer Beads 5mm (50)
  Project uses 2 pieces. You will need 1 package.


• BMB-7052 - Antiqued Brass Ornate Pointed 6-Petal Bead Caps 7mm (50)
  Project uses 2 pieces. You will need 1 package.


• BMB-4257 - Vintaj Natural Brass Ornate Scroll Bead Caps 7.5mm (4)
  Project uses 2 pieces. You will need 1 package.


• FHP-6311 - Antiqued Brass Head Pins 1.5 Inches / 22 Gauge (X50)
  Project uses 6 pieces. You will need 1 package.


• BCZ-5484 - Preciosa Czech Crystal 4mm Bicone Beads 'Fuchsia' (50)
  Project uses 8 pieces. You will need 1 package.


• FHP-6286 - Antiqued Brass Open Eye Pins 22 Gauge 1.5 Inch (x50)
  Project uses 2 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex