Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
Thread a 3mm Czech glass bead (BCP-3314) onto a head pin (FHP-6316). Make a wire loop wrap about a half way from the end of the headpin. (The 3mm bead will slide freely on the headpin) Trim off excess wire. Set aside.Thread a 3mm Czech glass bead (BCP-3314) onto a head pin (FHP-6316). This time make a wire loop wrap about a quarter way from the end of the headpin. (The 3mm bead will slide freely on the headpin) Trim off excess wire. Set aside.Thread a 3mm Czech glass bead (BCP-3314) onto a head pin (FHP-6316). This time make a wire loop wrap about a third of the way from the end of the headpin. (The 3mm bead will slide freely on the headpin) Trim off excess wire. Set aside.Cut a piece of 26 gauge wire (WCR-4226) 4 inches in length. Make the beginning of a wire loop wrap . Link the 26 gauge wire through the loops of the 3 headpins you finished earlier. Make sure the longest headpin is in the middle (see photo). Close the loop. Trim off excess wire. Set aside.Thread the Lucite flower (BCP-4330), the swirled bead cap (BMB-4257), the flower -shaped bead cap (BMB-7052), the daisy spacer (BMB-3243) and the 4mm Czech glass bead onto the 26 gauge wire that has the 3 headpins. Make a wire looped wrap. Close the loop. Trim off excess wire.Open the loop of the ear wire (FEA-6640). Link the entire assembled flower onto the loop. Close the loop. You're finished!Repeat all of the steps above to make the second earring.Please refer to photo for more detailed information about this project.
Keywords:floral, earrings, gold, brass, czech fire polish beads, btq-vintagelook, bp-vintajTip: Check package quantities for each component. You may have extra material to make more than one finished project, or will have leftovers for other projects. In some cases, adding on just one more package of a component may be all you need to make multiple pieces.
All designs © Beadaholique Inc.
WHAT YOU'LL NEED: (scroll down for purchase options)
- BCP-4330 - Lucite Bell Flowers Matte Smoke Topaz Brown Light Weight 20mm (4)
Project uses 2 pieces. You will need 1 package.
- FEA-6640 - Vintaj Natural Brass Round Loop Ear Wire 25mm (2 Pair)
Project uses 2 pieces. You will need 1 package.
- BMB-3243 - TierraCast 22K Gold Plated Pewter Daisy Spacer Beads 5mm (50)
Project uses 2 pieces. You will need 1 package.
- BMB-7052 - Antiqued Brass Ornate Pointed 6-Petal Bead Caps 7mm (50)
Project uses 2 pieces. You will need 1 package.
- BMB-4257 - Vintaj Natural Brass Ornate Scroll Bead Caps 7.5mm (4)
Project uses 2 pieces. You will need 1 package.
- FHP-6316 - Antiqued Brass Head Pins 1.5 Inches 24 Gauge (X50)
Project uses 6 pieces. You will need 1 package.
- BCP-3424 - Czech Fire Polished Glass Beads 4mm Round 'Wheatberry Mix Brown/Amber/Tan' (100)
Project uses 2 pieces. You will need 1 package.
- BCP-3314 - Czech Fire Polished Glass Beads 3mm Round 'Copper Iris' (50)
Project uses 2 pieces. You will need 1 package.
- WCR-4349 - Vintaj Brass Bronze Colored Copper Wire 26 Gauge 120 Feet (1 Spool)
Project uses 8 inches. You will need 1 package.
For closed captions/subtitles, click the CC icon on the video player after starting the video.
Earn Reward Points with your purchase of project components or tools.