Click or scroll to zoom
Tap or pinch to zoom
Retired - Enchanted Flame Bracelet
Click or scroll to zoom
Tap or pinch to zoom
Retired - Enchanted Flame Bracelet
Retired - Enchanted Flame Bracelet

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Enchanted Flame Bracelet

PROJECT B640
Designer: Julie Bean
Skill Level: Beginner
Make this beautiful bracelet in under 10 minutes using only 3 ingredients! The high shine of the black bezel bracelet contrasts nicely against the pretty patina on the embossed Lillypilly Designs copper sheet used for the inserts. You will want to make these for all your friends!
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

NOTE: You will also need a ruler and a pen to complete this project. Each of the squares on this bracelet are 20mm x 20mm. For this project, I decided to cut my squares to be 3/4" x 3/4", which is a little small but very close and much easier to measure then measuring 20mm x 20mm. Always wear eye protection when cutting metal.
  1. Flip your copper sheet over on your work table so that the patina side is down and the shiny copper side is facing upwards.
  2. Using a ruler, measure from a side edge 3/4" inward. Make a mark. Do this at several places going from that same edge. Draw a line connecting the dots so that you have a strip that is 3/4" wide. Now repeat this step but use the line you just drew as the starting point. You should now have 2 strips that are 3/4" wide each. To turn these into squares, just turn your copper sheet so that you are measuring from the side edge next to the original one you were measuring from and measure 3/4" inward. Make several measurement marks and draw a line. Then repeat this step using the line you just drew as a starting point and then repeat the step again. You just made a grid.
  3. Put on your protective eye wear.
  4. Cut the squares out of your metal sheet using metal shears. You can see how to do this HERE
  5. The copper sheets are very flexible, if any are bent, use your fingers to flatten them out so that they are straight. They might be sharp, so be cautious
  6. Place a dab of E6000 on the backside (shiny copper) of a square and spread it out a bit so that i almost goes to the edge. Do not use too much glue, you do not want it to spill out over the edges. Flip over and press into place on one of the bracelet bezel setting. Repeat this step with the other 7 bracelet bezel settings and Lillypilly copper squares.
  7. Let dry.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • LIL-1053 -
    Project uses 1 piece. You will need 1 package.

  • JB-4002 - Black Plastic Stretch Bezel Collage Bracelet 20mm Squares - 7 Inches (1)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5602 - BeadSmith 7 Plate Shears With Spring - Cuts Up To 20 Gauge Sheet Metal
  • XTL-0170 - Eurotool Clear Safety Glasses With Dark Blue Adjustable Frame
Additional Information
Ingredients JB-4002, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Black Plastic Stretch Bezel Collage Bracelet 20mm Squares - 7 Inches (1 pcs)
Black Plastic Stretch Bezel Collage Bracelet 20mm Squares - 7 Inches (1 pcs)
You will need 1 package(s).
1 package = 1 Piece.
$2.69 / Package | SKU: JB-4002
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed