Retired - Eden Ring

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Before you begin, please watch the video on How To Use Crystal Clay.
2. Following what you learned in the video, put on your gloves and make a small gum ball sized amount of black Crystal Clay. Press it into the center of your ring bezel, and gently mold it into the setting making sure it flatly spreads out to all the sides.
3. Once your clay is smooth, carefully place your antiqued silver stamping (making sure the glue-in recesses are on top) into the ring bezel. The stamping should fit perfectly into the bezel at a diagonal.
4. Next, add in a tiny dab of Hypo Cement glue into each recess on the stamping.
5. Using the beeswax tip applicator that comes in your Crystal Clay kit, gently pick up 6 Austrian crystal chatons and place them one by one onto the glue into the glue-in recesses of your flower stamping.
6. Allow your ring to cure overnight.
7. Enjoy!

• FRG-0719 - Nunn Design Antique Silver Plated Pewter Large Bezel 16mm Square Adjustable Ring
  Project uses 1 piece. You will need 1 package.


• FCO-5023 - Antiqued Silver Plated Flowers Stamping Connector For Glue In Rhinestones 12.5mm (1)
  Project uses 1 piece. You will need 1 package.


• SWCH-51400 - Austrian Crystal, 1088 Xirius Round Stone Chatons pp14, 40 Pieces, Crystal F
  Project uses 6 pieces. You will need 1 package.


• TRC-230 - Crystal Clay 2-Part Epoxy Clay Kit 'Black' 25 Grams
  Project uses 1 piece. You will need 1 package.


• XTL-1001 - G S Hypo Cement Precise Applicator Essential!
  Project uses 1 piece. You will need 1 package.