Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
You can use round nose pliers or wire looping pliers to make your simple wire loops for this project.
- Place the following beads onto an eye pin: 3mm bicone, 3mm pearl, 4mm round bead, 4mm pearl, 4mm round bead, dragonfly wings, 3mm pearl. After the last bead, create a simple wire loop. Trim off any excess wire.
- Open a jump ring and link onto it the 16mm pear-shaped pendant. Also link onto the jump ring the loop at the base of your dragonfly wing/bead segment. Close the jump ring.
- Open the loop at the base of your earring hook, the same way you would open a jump ring, and link the top loop of the dragonfly wing/bead segment onto it. Close the loop back up.
- Repeat steps 1 - 3 to make your matching earring. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PRES-6106-CIGR16 - PRESTIGE Crystal, #6106 Pear-Shaped Pendant 16mm, Citrus Green (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- PRES-5000-CIGR4 - PRESTIGE Crystal, #5000 Round Bead 4mm, Citrus Green (1 Piece)
Project uses 4 piece(s). You will need 4 package(s).
- PRES-5810-LTU4 - PRESTIGE Crystal, #5810 Round Pearl 4mm, Crystal Iridescent Light Turquoise, (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- FHP-6261 - Open Eye Pins, 2 Inches Long and 21 Gauge Thick, Silver Plated (50 Pieces)
Project uses 2 piece(s). You will need 1 package(s).
- PRES-5810-LTU3 - PRESTIGE Crystal, #5810 Round Pearl 3mm, Crystal Iridescent Light Turquoise, (1 Piece)
Project uses 4 piece(s). You will need 4 package(s).
- PRES-5328-CIGR3 - PRESTIGE Crystal, #5328 Bicone Bead 3mm, Citrus Green (1 Piece)
Project uses 2 piece(s). You will need 2 package(s).
- FJR-9116 - TierraCast Pewter, Small Open Jump Rings 5.4mm, 50 Pieces, Silver Plated (50 Pieces)
Project uses 2 piece(s). You will need 1 package(s).
- BMB-3278 - TierraCast Fine Silver Plated Pewter Dragonfly Wing Beads 20mm (2 Pieces)
Project uses 2 piece(s). You will need 1 package(s).
- FEA-9553 - Earring Findings, French Wire Hook with Ball 23mm Long 23 Gauge Silver-Filled (3 Pairs)
Project uses 1 pair. You will need 1 package(s).
RECOMMENDED TOOLS:
- XTL-5032 - The Beadsmith Wire Looping Pliers - Concave And Round Nose
- XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
- XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
- XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers