Retired - Cosmic Square Necklace

Name: Retired - Cosmic Square Necklace
Brand: Beadaholique
SKU: N726
Availability: OutOfStock

PROJECT N726

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Two delicate sterling silver chains hold an Austrian crystal cosmic ring in this dainty necklace. It's the perfect signature accessory to wear everyday!

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace is designed with a shorter chain length so that the cosmic square pendant hangs higher on the neck and to keep the cosmic square from moving around too much. If you'd like a longer necklace, purchase additional chain and cut your pieces longer, but keep in mind that the square may move around more.

Begin by cutting your 3 foot piece of sterling silver 1.3 mm fine flat cable chain into two 16 inch lengths.
Thread one piece of chain through the hole in the 14 mm Cal V Si Austrian crystal Cosmic Square Ring pendant, pulling it through until the ends are even. Make sure the chain isn't twisted, and join the two end links using one of the 2.5 mm jump rings. Repeat this process with the second piece of chain.
Attach the lobster clasp to the small jump ring connecting the chains on one side of the necklace and attach the 4 mm jump ring to the small jump ring on the other side of the necklace.
All done!

WHAT YOU'LL NEED: (scroll down for purchase options)

CHA-1020 - Sterling Silver Fine Delicate Cable Chain 1.3mm Bulk By the Foot
Project uses 32 inches. You will need 3 packages.

FCL-02208 - Sterling Silver Straight Lobster Clasps 8mm (4)
Project uses 1 piece. You will need 1 package.

FJR-03022 - Sterling Silver Open Jump Rings 2.5mm 22 Gauge (20)
Project uses 2 pieces. You will need 1 package.

FJR-03046 - Sterling Silver Open Jump Rings 4mm 21 Gauge (20)
Project uses 1 piece. You will need 1 package.

SWC-2004 -
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
XTL-0036 - Wubbers Classic Series Bent Chain Nose Quality Jeweller's Pliers
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Special Occasion
Ingredients	CHA-1020, FCL-02208, FJR-03022, FJR-03046,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Sterling Silver Fine Cable Chain, 1.3mm, by the Foot

            Sterling Silver Fine Cable Chain, 1.3mm, by the Foot
        
You will need 3 package(s).
1 package = By the Foot.

                $3.75
            
             / Package | SKU: CHA-1020

Lobster Clasps, Straight 8mm, Sterling Silver (4 Pieces)

            Lobster Clasps, Straight 8mm, Sterling Silver (4 Pieces)
        
You will need 1 package(s).
1 package = 4 Pieces.

                $5.69
            
             / Package | SKU: FCL-02208

Sold out

Sterling Silver Open Jump Rings 2.5mm 22 Gauge (20 pcs)

            Sterling Silver Open Jump Rings 2.5mm 22 Gauge (20 pcs)
        
You will need 1 package(s).
1 package = 20 Pieces.

                $2.59
            
             / Package | SKU: FJR-03022

Sold out

Sterling Silver Open Jump Rings 4mm 21 Gauge (20 pcs)

            Sterling Silver Open Jump Rings 4mm 21 Gauge (20 pcs)
        
You will need 1 package(s).
1 package = 20 Pieces.

                $4.87
            
             / Package | SKU: FJR-03046