Retired - Clover Dome Ring

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Using your flush cutters, snip off the jump rings and loops from 3 antiqued brass clover charms.
2. Use your Vintaj relief block to buff the tops of the charms to show off more detail.
3. Next, watch the video on How to Use Crystal Clay.
4. Following what you learned in the video, put on your gloves and make a small gum ball sized amount of green Crystal Clay.
5. Embed the clay carefully into your bezel ring, remembering to leave room for the glass dome. If any clay gets pushed out from the side scallops of the ring, simply remove using your fingers.
6. Next, carefully embed green seed beads around the charms into the clay.
7. Lastly, enclose the ring bezel using your glass half dome. Press into the clay. As the clay dries, it will attach both components together.
8. You're done!

• TRC-235 - Crystal Clay 2-Part Epoxy Clay Kit 'Dark Green' 25 Grams
  Project uses 1 piece. You will need 1 package.


• DB-046 - Miyuki Delica Seed Beads 11/0 Silver Lined Light Green DB046 7.2 Grams
  Project uses 1 tube. You will need 1 package.


• BGL-01003 - Hollow Glass Dome for Jewelry, 10.5x19.5mm Half Dome, 4 Pieces
  Project uses 1 piece. You will need 1 package.


• FRG-1001 - Adjustable Bezel Ring, Round 20.5mm, 4 Pieces, Antiqued Brass
  Project uses 1 piece. You will need 1 package.


• PND-6043 - Antiqued Brass Small Four-Leaf Clover Charm With Ring - 10.5mm (6)
  Project uses 3 pieces. You will need 1 package.

• XTL-2222 - Vintaj Metal Relief Block For Filing, Buffing & Sanding
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex