Click or scroll to zoom
Tap or pinch to zoom
Retired - City Chic Bracelet
Click or scroll to zoom
Tap or pinch to zoom
Retired - City Chic Bracelet
Retired - City Chic Bracelet

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - City Chic Bracelet

PROJECT B633
Designer: Julie Bean
Skill Level: Intermediate
By alternating colors of textured metal chains, a chic striped appearance results and this bracelet becomes a striking accessory to any outfit. Urban enough to be worn to a concert yet classic enough for work, you will love this bracelet.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

NOTE: Measure your wrist before beginning this project. The bracelet we are going to make will end up measuring just under 7.5" If you need a larger bracelet, cut longer lengths of chain in the first couple steps. If you need a shorter bracelet, then cut shorter lengths of chain.
  1. Begin by cutting 3 identical lengths of antique silver plated textured double round link cable chain, 7" long each.
  2. Next, cut 2 identical lengths of antique copper plated textured double round link cable chain, 7" long each.
  3. These chains actually consist of multiple open links which can be used just like jump rings.
  4. Take your multi-strand tube clasp and separate the two halves. Take one of your silver plated 7" chain lengths and open the two links on the end and connect them to the bottom loop on one side of your clasp. Close the links back up.
  5. On the second loop on the clasp, attach one of the antique copper chain lengths the same way you attached the chain in the last step.
  6. On the middle loop on the clasp, attach another antique silver plated chain length.
  7. On the fourth loop on the clasp, attach your second antique copper chain length.
  8. Finally, on the fifth loop on the clasp, attach your last antique silver plated chain length.
  9. On your table, lay out your bracelet and straighten all the chains so that there are no twists. Attach the other half of the clasp to the chain ends (the same way you connected the first half of the clasp). Make sure your clasp is oriented properly so that it will close when the two halves meet.
  10. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9850 - Antiqued Silver Plated Textured Double Round Link Cable Chain 5mm Bulk By The Foot
    Project uses 14 inches. You will need 2 packages.

  • CHA-9852 - Antiqued Copper Plated Textured Double Round Link Cable Chain 5mm Bulk By The Foot
    Project uses 14 inches. You will need 2 packages.

  • FCL-5524 - Antiqued Silver Plated Tube Clasp 31mm Five Rings Strands (2)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients CHA-9850, FCL-5524,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 2 package(s).
1 package = .
/ Package | SKU: CHA-9850
You will need 1 package(s).
1 package = .
/ Package | SKU: FCL-5524
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
$6.49 / Package | SKU: XTL-5511
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
$16.85 / Package | SKU: XTL-5600

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed