Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
Begin this project by forming the center links of each color.
- Take all 8 rivoli pendant links in green and attach them in a chain using jump rings. Be sure to add one jump ring to each end of each strand for you to attach the chains.
- Repeat this with red and crystal rivolis.
- Now that all of your rivoli links are together you will cut your chain. These measurements are very specific to get the necklace to lay right.
- To one side of the red links, cut off and attach 8" of chain. To the other side cut off and attach 6" of chain.
- On both sides of the white links, cut and attach 8" of chain, on both sides.
- To one side if the green links, cut and attach 8 1/4". To the other side cut off and attach 10".
- Go to one side of the chains with the 8", 8", 8 1/4" and loop a jump ring through each chain link, attaching them all together.
- On the other side, attach a jump ring through each chain link, but before closing the jump ring, add your lobster clasp.
WHAT YOU'LL NEED: (scroll down for purchase options)
- BCV-27 - Vintage Lucite Antiqued Gold Toned Rivoli Pendant Link Emerald 19.5mm (8)
Project uses 8 pieces. You will need 1 package.
- BCV-26 - Vintage Lucite Antiqued Gold Toned Rivoli Pendant Link Crystal 19.5mm (8)
Project uses 8 pieces. You will need 1 package.
- BCV-29 - Vintage Lucite Antiqued Gold Toned Rivoli Pendant Link Ruby 19.5mm (8)
Project uses 8 pieces. You will need 1 package.
- FCL-2401 - Antiqued Brass Curved Lobster Clasps 12mm (6)
Project uses 1 piece. You will need 1 package.
- CHA-9674 - Antiqued 22K Gold Plated Curb Chain 4mm Bulk By The Foot
Project uses 48 pieces. You will need 5 packages.
- FJR-5471 - Antiqued Brass Open Jump Rings 5mm 20 Gauge (x100)
Project uses 29 pieces. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex