Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
- Start by cutting 3 lengths of wire about 1 foot each. Gather the ends of all three wires you just cut into one crimp bead and crimp them together. Feed the wire into one of your knot covers starting with the long ends of wire, so that your crimp bead is resting where the knot cover can close over it. Go ahead and close your knot cover and trim any wire that is sticking out.
- On your first wire, place beads on in this order: 13 red, 1 white, 2 red, 2 white, 1 red, 13 white, 1 green, 2 white, 2 green, 1 white, 13 green.
- On your second wire, place beads on in this order: 17 red, 1 white, 2 red, 2 white, 1 red, 17 white, 1 green, 2 white, 2 green, 1 white, 17 green.
- On your third and last wire, place beads on in this order: 21 red, 1 white, 2 red, 2 white, 1 red, 21 white, 1 green, 2 white, 2 green, 1 white, 21 green.
- When you are done with all of your beads, put all three wires through a knot cover, then a crimp bead. Arrange your wires to whatever order and however tight you prefer for them to look and then crimp your crimp bead and close the knot cover. Trim extra wire when completed.
- Open up a jump ring and put on the loops from both of the knot covers and the earring wire. Close the jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
- JSK-0311 - Toho Round Seed Beads 11/0 5 Transparent Light Siam Ruby 8g
Project uses 1 tube. You will need 1 package.
- JSK-0317 - Toho Round Seed Beads 11/0 7 'Transparent Peridot' 8g
Project uses 1 tube. You will need 1 package.
- JSK-0049 - Toho Round Seed Beads 11/0 122 Opaque Lustered Navajo White 8 Gram Tube
Project uses 1 tube. You will need 1 package.
- FCR-2088 - Gun Metal Plated Clamshell Knot Covers With Closed Loop 3.7mm (50)
Project uses 4 pieces. You will need 1 package.
- FEA-3092 - Gun Metal Plated Plated Fish Hook Earring Hooks (50)
Project uses 2 pieces. You will need 1 package.
- FJR-5453 - Gun Metal Plated Open Jump Rings 4mm 22 Gauge (50)
Project uses 2 pieces. You will need 1 package.
- XCR-67533 - Beadalon Wire Satin Silver 7 Strand .015 Inch / 30Ft
Project uses 1 piece. You will need 1 package.
RECOMMENDED TOOLS:- XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
- XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
- XTL-5230 - Double Notch Crimping Pliers - Works on 2mm And 3mm Crimps