Click or scroll to zoom
Tap or pinch to zoom
Cassidy Leather Choker
Click or scroll to zoom
Tap or pinch to zoom
Cassidy Leather Choker
Click or scroll to zoom
Tap or pinch to zoom
Cassidy Leather Choker
Cassidy Leather Choker

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Cassidy Leather Choker

Store Closing, Limited Stock
PROJECT N2172
Designer: Kat Silvia
Skill Level: Beginner
This simple choker is perfect for layering necklaces. With the supplies you will get by purchasing this project you will be able to make two complete necklaces.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures approximately 16.5 inches. To modify the length, simply adjust the length of leather used.
  1. Cut 16 inches of leather.
  2. To one end, slide on a crimp cord end. Using the crimping pliers to crimp the center of the cord end around the end of the leather.
  3. Slide on one noodle bead.
  4. Add a crimp cord end to the other side of the leather, same as you did before.
  5. Open one jump ring and attach it to the loop of one cord end. Close the jump ring.
  6. Open another jump ring and attach it to the other cord end as well as to a lobster clasp. Close the jump ring and you're all done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHY-1515 - Genuine Leather Cord, Round 1.5mm, By the Yard, Natural Black
    Project uses 16 Inches. You will need 1 package.

  • BMB-4077 - 22K Gold Plated Long Curved Noodle Tube Beads 3mm x 100mm (4)
    Project uses 1 piece. You will need 1 package.

  • FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
    Project uses 2 pieces. You will need 1 package.

  • FCL-2514 - Gold Plated Curved Lobster Clasps 12mm (10 Pieces)
    Project uses 1 piece. You will need 1 package.

  • FCR-3157 - Gold Tone Brass Fancy Crimp Beads 1mm Loop Cord Ends (10)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Boho
Ingredients CHY-1515, BMB-4077, FJR-5250, FCL-2514, FCR-3157,
Useful Techniques & Learning Guides
How to Open and Close a Jump Ring

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: CHY-1515
You will need 1 package(s).
1 package = .
/ Package | SKU: BMB-4077
You will need 1 package(s).
1 package = .
/ Package | SKU: FJR-5250
You will need 1 package(s).
1 package = .
/ Package | SKU: FCL-2514
You will need 1 package(s).
1 package = .
/ Package | SKU: FCR-3157
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:
/ Package | SKU: XTL-5608
/ Package | SKU: XTL-5600
/ Package | SKU: XTL-5511

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Related Products: Design Variations

Sold out
from

Sold out
from

Sold out
from

Sold out
from

You recently viewed

Clear recently viewed