Retired - Building Sandcastles Anklet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Cut a length of silver filled oval rolo chain about 9" long, or the desired length.
2. Open a 5mm silver filled jump ring and link it to the end chain link on one side of your cut chain. Close the jump ring.
3. Your sterling silver sand pail and shovel charm comes with two jump rings attached - one holding the shovel and pail together and another one linked to the first one. Open and remove the second jump ring.
4. Link your Austrian crystal 14mm pure leaf pendant in crystal blue shade onto the loose jump ring (from the last step). Close the jump ring.
5. Slide both of your jump rings (with pure leaf pendant and with shovel and pail) onto your length of chain.
6. Open the jump ring that is attached to your curved lobster clasp and attach this to the last chain link. Close the jump ring.
7. Enjoy!

• FJR-8016 - Silver Filled Open Jump Rings 5mm 21 Gauge (20)
  Project uses 1 piece. You will need 1 package.


• FCL-8011 - Silver Filled Curved Lobster Clasps With Rings 8.2mm (4 Pieces)
  Project uses 1 piece. You will need 1 package.


• CHA-0235 - Silver Filled Oval Rolo Chain 2.2mm Bulk By The Foot
  Project uses 9 inches. You will need 1 package.


• PND-1370 - Sterling Silver Beach Sand Pail and Shovel Charm 16.5mm (1)
  Project uses 1 piece. You will need 1 package.


• SWBB-4360 -
  Project uses 1 piece. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex