Retired - Bianca Necklace

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Using your chain nose pliers, carefully open the chain links on your flattened curb link chain to make two 10.5" lengths of flattened chain. (The links are quite sturdy, so this will take some strength)
2. Open a 8mm gold plated jump ring using your chain nose pliers. Before closing, slide on the loop from your gold plated jump ring and close.
3. Open and attach another 8mm jump ring onto the other end of that same length of chain. Slide the jump ring through one of the holes on a Peacock Blue resin sew-on marbled stone. Close the jump ring.
4. Open and add another jump ring onto the second hole of that same sew-on cabochon stone. Before closing it, slide the jump ring through one of the holes on a second sew-on stone and close.
5. Repeat this process of connecting blue resin sew-on stones via open jump rings and close. You should have a total of 10 connected stones once done.
6. Onto the open jump ring connected to the 10th resin sew-on stone, attach the last link from one side of your second length of chain and close.
7. Open another jump ring and attach it onto the last link on the other side of that same length of chain and close.
8. Now you will be attaching gold tone spike beads using smaller gold plated jump rings.
9. Flip your necklace over. Using your chain nose pliers, open up a 5mm gold plated jump ring, slide it onto the second 8mm jump ring and close. Open up another 5mm jump ring, slide on the loop from a gold tone spike bead and attach it onto that first 5mm jump ring.
10. Repeat this process until you have 7 gold tone spike beads dangling from your necklace.
11. Close your clasp and you're done!

• BPL-0201 - Spike Beads 33mm - Metallic Gold Tone (10 Pieces)
  Project uses 7 pieces. You will need 1 package.


• CHA-10081 - Bright Gold Toned Brass 7mm Heavy Flattened Curb Chain - By The Ft
  Project uses 21 inches. You will need 2 feet.


• FCL-2573 - Bright Gold Plated Lobster Clasps Extra Large 23mm (2)
  Project uses 1 piece. You will need 1 package.


• FJR-5501 - 22K Gold Plated Open Jump Rings 5mm 19 Gauge (50)
  Project uses 14 pieces. You will need 1 package.


• FJR-5477 - 22K Gold Plated Open Jump Rings 8mm 20 Gauge (50)
  Project uses 13 pieces. You will need 1 package.


• SPCB-1337 - Dazzle It! Resin Sew-On Marbled Stones, 2-Hole Round Cabochons 18mm, 10 Pieces, Peacock Blue
  Project uses 10 pieces. You will need 1 package.

• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose