Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Open one of the small jump rings (FJR-3045). Link the jump ring onto the left side loop of the gold leaf connector (FCO-3472) and to the hole at the left side of the widest point of the brown filigree stamping (PND-00087). Close the jump ring.
- Open the other small jump ring and link onto the right side of the gold leaf connector and through the hole on the right side of the filigree at the widest point. Close the jump ring. (see photo)
- Open the leaf bail (FCO-3062) with your chain nose pliers just enough so you can fit it over the top of the Austrian crystal crystal (SWC-9911) without it scraping it. Align the small prongs inside the bail over the hole in the pendant and the hole at the top of the brown filigree piece. Gently squeeze the bail closed with your fingers. You can also use a pair of nylon chain nose pliers to make sure it is snug. Do not press too hard, to avoid damaging the crystal.
- Thread the gold plated chain (CHA-9814) through the large hole at the top of the leaf bail.
- Open a small jump ring. Link the jump ring onto loop of the spring ring (FCL-1571) and to the end of the chain. Close the jump ring.
- Open the larger jump ring (FJR-3055). Link the jump ring to the other end of the chain and to the loop of the small leaf charm (PND-5440). Close the jump ring. You're finished!
WHAT YOU'LL NEED: (scroll down for purchase options)
- PND-00087 -
Project uses 1 piece. You will need 1 package.
- FCO-3472 - Nunn Design Antiqued 24kt Gold Plated Pewter Fern Connector Bar 33mm (1)
Project uses 1 piece. You will need 1 package.
- SWC-9911 -
Project uses 1 piece. You will need 1 package.
- PND-5440 - TierraCast 22K Gold Plated Pewter Tiny Oak Leaf Charm 10.5mm (4)
Project uses 1 piece. You will need 1 package.
- CHA-9814 - Nunn Design Antiqued Gold Plated Oval Cable Chain 3mm By The Foot
Project uses 18 inches. You will need 2 packages.
- FJR-03045 - 14K Gold Filled Open Jump Rings 4mm 21 Gauge (10)
Project uses 3 pieces. You will need 1 package.
- FJR-03055 - 14K Gold Filled Open Jump Rings 5mm 21 Gauge (10)
Project uses 1 piece. You will need 1 package.
- FCL-1571 - 22K Gold Plated Spring Ring Clasps 7mm (25)
Project uses 1 piece. You will need 1 package.