Retired - Arrow Cuff Bracelet

Name: Retired - Arrow Cuff Bracelet
Brand: Beadaholique
SKU: B2018
Availability: OutOfStock

PROJECT B2018

Designer: Kat Silvia

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

The solid brass of this cuff will naturally age over time turning into a beautiful well worn treasure.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Using your flush cutters, carefully snip off the pendant ring from the end of the arrow. If the edges are sharp file it down with the diamond file.
Use the Bracelet Bending Pliers to bend the arrow to fit the form of the cuff.
Take a dab of E6000 along the backside of the bent arrow and secure it to the center front side of the cuff. Hold in place for a minute to make sure the glue bonds.
Allow the bracelet overnight to dry before wearing.

WHAT YOU'LL NEED: (scroll down for purchase options)

JB-2570 - Solid Brass Flat Cuff Bracelet Base 12.7mm (0.5 Inch) Wide (1 Piece)
Project uses 1 piece. You will need 1 package.

PND-10067 - Antiqued Silver Plated Large Arrow Pendant Stamping 61.5x10mm (2)
Project uses 1 piece. You will need 1 package.

XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-0084 - BeadSmith Bracelet Bending Pliers - Gently Curve Bracelets And Components
XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-0102 - 10 Piece 4 Inch Precision Diamond Needle File Set

Additional Information

Theme	Men's, Boho
Ingredients	JB-2570, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Solid Brass Flat Cuff Bracelet Base 12.7mm (0.5 Inch) Wide (1 Piece)

            Solid Brass Flat Cuff Bracelet Base 12.7mm (0.5 Inch) Wide (1 Piece)
        
You will need 1 package(s).
1 package = 1 Piece.

                $5.80
            
             / Package | SKU: JB-2570

E6000 Industrial Strength Glue Adhesive (0.18 fl oz)

            E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
        
You will need 1 package(s).
1 package = 1 Piece.

                $2.12
            
             / Package | SKU: XTL-1054