Click or scroll to zoom
Tap or pinch to zoom
Retired - Age of Jazz Necklace
Click or scroll to zoom
Tap or pinch to zoom
Retired - Age of Jazz Necklace
Click or scroll to zoom
Tap or pinch to zoom
Retired - Age of Jazz Necklace
Click or scroll to zoom
Tap or pinch to zoom
Retired - Age of Jazz Necklace
Retired - Age of Jazz Necklace

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Age of Jazz Necklace

PROJECT N680
Designer: Esther Lee
Skill Level: Beginner
Flirty and swingy, this necklace would have looked stunning on a flapper from the 1920's. Just as long necklaces were fashionable then, they still are today. There is a trick to this necklace too, most of the beads are already linked together - making it look complicated to make but it's not!
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Cut a 17" length of your ladder chain.
  2. Open 1 gunmetal jump ring and link it to the two ends of your Czech Fire Polish Glass Bead link chain, thus making them form a circle. Before closing the jump ring, also link onto it one end of your cut ladder chain. Close the jump ring. (Tip: If there are two larger beads at the ends of the Czech Fire Polish chain you receive, the chain might not sit correctly when joined together. If that is the case, you may want to remove a single bead from the end of the Czech Fire Polish Glass Bead link chain.)
  3. Take a ruler and measure 18" along the length of your circular Czech Fire Polish link chain. At that point, open and link a jump ring to one of the black simple loops and also link to it the other end of your chain. Close the jump ring.
  4. All done!!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FJR-5295 - Gun Metal Plated Open Jump Rings 5mm 22 Gauge (100)
    Project uses 2 pieces. You will need 1 package.

  • CHA-9747 - Gunmetal Plated 3.7mm x 6.7mm Ladder Chain - Bulk By The Foot
    Project uses 17 inches. You will need 2 packages.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients FJR-5295, CHA-9747,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Gun Metal Plated Open Jump Rings 5mm 22 Gauge (100 pcs)
Gun Metal Plated Open Jump Rings 5mm 22 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$2.39 / Package | SKU: FJR-5295
You will need 2 package(s).
1 package = .
/ Package | SKU: CHA-9747
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
$6.49 / Package | SKU: XTL-5511
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
$16.85 / Package | SKU: XTL-5600

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed