Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Making sure you leave the smaller links intact at the ends, cut the following using the bar and link chain:
  2. 4 pieces @ 2 bar links (1") long.
  3. 4 pieces @ 3 bar links (about 1 5/8") long.
  4. 4 pieces @ 4 bar links (about 2 1/4") long.
  5. 2 pieces @ 5 bar links (2 3/4") long.
  6. This is for both earrings.
  7. Thread the following onto an eyepin:
  8. a 4mm bead
  9. a 3 bar length chain (threading the eyepin through the small link at the end of the chain)
  10. another 4mm bead
  11. a 4 bar length chain
  12. 4mm bead
  13. 5 bar length chain
  14. 4mm bead
  15. 4 bar length
  16. 4mm bead
  17. 3 bar length
  18. 4mm bead.
  19. After you thread the 6th bead onto your eyepin, create a simple loop at the end. Be sure to leave a little wiggle room so that the beads and the chain aren't too cramped. You want the chain to hang freely.
  20. Using 10 of the 4mm beads, and 2 of the 6mm beads, thread onto headpins creating drops with simple loops. Note: this will be for both earrings.
  21. Using the proper way to open and close a jump ring or a wire loop add a small bead drop to the end of each of the small links at the end of every dangling piece of chain.
  22. Attach one end of each of the 2 pieces of 2 bar length chain to the loops at either end of the beaded eyepin.
  23. Gather the other two ends together and attach to a single jump ring.
  24. Add the larger bead drop to the jump ring between the two chains, so that it dangles down.
  25. To the same jump ring, add the earring leverback.
  26. Repeat these steps to create the second earring, with the exception of steps 1 and 4.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FHP-6220 - 22K Gold Plated Open Eye Pins 21 Gauge 2 Inches (x50)
    Project uses 2 pieces. You will need 1 package.

  • FHP-5221 - 22K Gold Plated Head Pins - 22 Gauge, 2 Inches (X50)
    Project uses 12 pieces. You will need 1 package.

  • FEA-6013 - 22K Gold Plated Earrings Leverbacks With Shell (x10)
    Project uses 3 pieces. You will need 1 package.

  • SPMX-54 - Gemstone Bead Lot Mix 4mm Round Beads /15.5 Inch Strand
    Project uses 22 pieces. You will need 1 package.

  • SPMX-56 - Gemstone Bead Lot Mix 6mm Round Beads /15.5 Inch Strand
    Project uses 2 pieces. You will need 1 package.

Additional Information
Ingredients FHP-6220, FHP-5221, FEA-6013,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Open Eye Pins, 2 Inches Long and 21 Gauge Thick, 22K Gold Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$6.49 / Package | SKU: FHP-6220
Head Pins, 2 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$5.09 / Package | SKU: FHP-5221
Earring Findings, Leverbacks with Shell 14x9mm, Gold Plated (5 Pairs)
You will need 1 package(s).
1 package = 5 Pairs.
$5.19 / Package | SKU: FEA-6013
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed