Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since
this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.
- Cut a 10-inch length of gold color 0.19" Beadalon beading wire.
- String one crimp bead, then one horse shoe wire protector. Tuck the end of the wire back into the crimp bead and crimp it. Cover the crimp bead with a crimp bead cover.
- String one noodle bead, one bead cap, one carnelian bead and one bead cap. Repeat two more times. Then add the last noodle bead.
- String on one more crimp bead and one more horseshoe wire guard. Pass the wire back through the crimp bead and crimp it. Be careful not to lose the crimp bead inside the noodle bead! You are going to be putting a crimp bead cover over the crimp bead, so you can leave up to a millimeter between the crimp bead and the end of the noodle bead.
- Trim the wire. Cover the crimp bead with a crimp bead cover.
- Use a jump ring at each end of the bracelet to connect each part of the toggle clasp.
WHAT YOU'LL NEED: (scroll down for purchase options)
- FCR-01005 - 14K Gold Filled Crimp Bead Covers 3mm (10)
Project uses 2 pieces. You will need 1 package.
- BMB-06346 - 14K Gold Filled Delicate Bead Caps 4.5mm (12)
Project uses 6 pieces. You will need 1 package.
- BMB-4140 -
Project uses 4 pieces. You will need 1 package.
- FCR-1206 - Beadalon Gold Plated Crimp Tubes 1.5mm (65 Beads)
Project uses 2 pieces. You will need 1 package.
- FJR-03045 - 14K Gold Filled Open Jump Rings 4mm 21 Gauge (10)
Project uses 2 pieces. You will need 1 package.
- XCR-69893 - Beadalon Beading Wire Gold Color 19 Strand .018 Inch / 30 Feet
Project uses 10 inches. You will need 1 package.