Kitty Kat Headband

PROJECT H2007
Designer: Kat Silvia
Skill Level: Intermediate
This fun wire wrapped headband will have you saying Meow"!"
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

For best results, I recommend you do one ear at a time, so please follow the instructions to make one ear and repeat to mirror the other ear. If you are not familiar with wire wrapping onto a frame please watch our video here for a similar technique used to create this headband.
  1. Begin by cutting off 10 inches of 20 gauge wire. Find the center point of this wire and fold so that you have about a 45 degree angle to make the point of the ear.
  2. Position this piece so that it measures 2.25 inches from the tip of the ear to where it touches the headband. Note that both sides of this piece of wire will be different lengths due to the curvature of the headband. So the inside length is 2.25 inches, but the outer length might be closer to 2.5 inches.
  3. Once you have your wire positioned, wrap the ends of the wire around the headband frame four times, wrapping towards the outside of the ear. Be sure to end your wrap on top so that the tip of the wire will not poke your head as you wear it. Trim any excess wire. Do this for both sides of this wire. Make sure the wires are both wrapping the same way on the head band.
  4. Next, cut off a 30 inch length of 26 gauge wire.
  5. Start on the outer most wire and on the inside of that wire, in the area between the four wraps on the head band and where it starts to angle into the ear, wrap four times to anchor your wire here into that small nook.
  6. Then work your way up the ears by wrapping three times. String on one black bead, lay it on the outer side of the ear frame, and wrap three more times and add another bead. You will continue this step, working your way up the ear and down to the other side. Keep your wrapping neat and tight.
  7. Once you have come down the other side, finish with three wraps on the ear frame, then four wraps on the nook in between the ear and the head band 20 gauge wire wraps. Again be sure to have your tail on top of the headband before trimming any excess wire.
  8. So that completes one ear. Move on to the second ear, making sure your wraps are going the same direction for an even result.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BCP-00123 - True2 Czech Fire Polished Glass, Faceted Round Beads 2mm, 50 Pieces, Jet
    Project uses 62 pieces. You will need 2 packages.

  • FCO-9016 - 22K Gold Plated Metal Tiara Headband Frame - Fun Craft Beading Project 5.5 Inches (1)
    Project uses 1 piece. You will need 1 package.

  • WCR-2633 - Artistic Wire, Copper Craft Wire 26 Gauge Thick, 15 Yard Spool, Tarnish Resistant Brass
    Project uses 60 Inches. You will need 1 package.

  • WCR-2033 - Artistic Wire, Copper Craft Wire 20 Gauge Thick, 6 Yard Spool, Tarnish Resistant Brass
    Project uses 20 Inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-0074 - Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Pop Culture, Pets/Animals, Halloween
Ingredients BCP-00123, FCO-9016, WCR-2633, WCR-2033,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
True2 Czech Fire Polished Glass, Faceted Round Beads 2mm, Jet (50 Pieces)
You will need 2 package(s).
1 package = 50 Pieces.
$2.49 / Package | SKU: BCP-00123
22K Gold Plated Metal Tiara Headband Frame - Fun Craft Beading Project 5.5 Inches (1 pcs)
You will need 1 package(s).
1 package = 1 Piece.
$6.75 / Package | SKU: FCO-9016
Artistic Wire, Copper Craft Wire 26 Gauge Thick, Tarnish Resistant Brass (15 Yard Spool)
You will need 1 package(s).
1 package = 1 Spool.
$4.99 / Package | SKU: WCR-2633
Artistic Wire, Copper Craft Wire 20 Gauge Thick, Tarnish Resistant Brass (6 Yard Spool)
You will need 1 package(s).
1 package = 1 Spool.
$4.59 / Package | SKU: WCR-2033
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed