Retired - An Elegant Affair Choker

PROJECT N2174
Designer: Kat Silvia
Skill Level: Intermediate
This choker sits high on the neck to show off the faceted Austrian crystal stone in an elegant color palette of silver and black.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This necklace measures approximately 16 inches. To modify the length, simply adjust the length of chain on both sides respectively.
  1. Begin by setting the stones into their settings. You can do this by using a popsicle stick or the side of a nylon jaw pliers. Please watch our video here to see this easy technique. Once your stone is in the setting, set it aside. Repeat for all 12 stones.
  2. Using your flush cutters, cut two lengths of beading wire 12 inches each.
  3. Place a bead stopper about 2 inches from one end of both wires to hold them together as seen in this video: Using a Bead Stopper for Multi-strand projects.
  4. Next, string on two crystals to each strand, then string on one two hole setting with the rivoli stone. Continue this pattern until you have added all the settings then end with two more crystals on each strand.
  5. Onto both wires string on one crimp bead and one closed jump ring. Thread the wire back down through the crimp tube. Pull snug and adjust the wires to get them nice and even. Then using the crimpers, crimp the crimp tube. Use you flush cutters to trim any excess wire. Add a crimp cover. Move to the other side, remove the bead stopper and repeat this process.
  6. Cut off two lengths of chain, 2.5 inches each.
  7. Take one length of chain and attach it to one end of the strung piece by opening a jump ring and closing it around the chain and the closed jump ring on the strung piece. Move to the end of this chain and open another jump ring to attach one lobster clasp to the chain. Close the jump ring.
  8. Take the second length of chain and using a jump ring attach it to the other side of the strung piece as done above. Move to the other side of this chain and open another jump ring to attach one chain extender. Close the jump ring and you're all done.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SWCR-4403 - Austrian Crystal Fancy Stone Setting, Fits #1122 12mm Rivoli, 4 Pieces, Rhodium Plated
    Project uses 12 pieces. You will need 3 packages.

  • SWC-0300 - Austrian Crystal, #5000 Round Beads 3mm, 20 Pieces, Crystal
    Project uses 52 pieces. You will need 3 packages.

  • SWC-9302 - Austrian Crystal, #1122 Rivoli Fancy Stones 12mm, 4 Pieces, Jet Unf
    Project uses 12 pieces. You will need 3 packages.

  • CHA-9953 - Silver Plated Rolo Chain, 3.7mm, by the Foot
    Project uses 5 Inches. You will need 1 package.

  • FCL-2522 - Silver Plated Curved Lobster Clasps 15mm (10)
    Project uses 1 piece. You will need 1 package.

  • AXC-2730 - Beadalon Silver Plated Chain Necklace Extender W/ Heart 2 Inch (10)
    Project uses 1 piece. You will need 1 package.

  • FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
    Project uses 4 pieces. You will need 1 package.

  • FJR-4121 - Silver Plated Closed Jump Rings 6mm 18 Gauge (20)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1055 - Shiny Silver Tone Crimp Bead Covers 5mm (144)
    Project uses 2 pieces. You will need 1 package.

  • FCR-1720 - BeadSmith Crimp Tubes, 2.5x2.5mm, 100 Pieces, Silver Plated
    Project uses 2 pieces. You will need 1 package.

  • XCR-67533 - Beadalon Wire Satin Silver 7 Strand .015 Inch / 30Ft
    Project uses 24 Inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5608 - Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-0074 - Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work
  • XTL-3000 - Bead Stopper- Stop Beads Sliding Off Stringing Material
Additional Information
Theme Vintage Look, Special Occasion, Halloween
Ingredients CHA-9953, FCL-2522, AXC-2730, FJR-5150, FJR-4121, FCR-1055, FCR-1720, XCR-67533,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Silver Plated Rolo Chain, 3.7mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$4.17 / Package | SKU: CHA-9953
Lobster Clasps, Curved 15mm, Silver Plated (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$7.69 / Package | SKU: FCL-2522
Necklace Chain Extender, 3.5mm Curb Links with Heart 2 Inches, Silver Plated (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$2.49 / Package | SKU: AXC-2730
Silver Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$3.39 / Package | SKU: FJR-5150
Silver Plated Closed Jump Rings 6mm 18 Gauge (20 pcs)
You will need 1 package(s).
1 package = 20 Pieces.
$2.69 / Package | SKU: FJR-4121
Crimp Bead Covers, 5mm, Silver Tone (144 Pieces)
You will need 1 package(s).
1 package = 144 Pieces.
$10.29 / Package | SKU: FCR-1055
The Beadsmith Crimp Beads, Tube 2.5x2.5mm, Silver Plated (100 Pieces)
You will need 1 package(s).
1 package = 100 Pieces.
$2.25 / Package | SKU: FCR-1720
Beadalon Wire
You will need 1 package(s).
1 package = 1 Spool.
$4.79 / Package | SKU: XCR-67533
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Xuron 4 In 1 Crimping Pliers - Works On 1, 2 And 3mm Crimps!
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Eurotool Nylon Jaw Pliers Chain Nose- For Scratch-Free Wire Work

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed