Click or scroll to zoom
Tap or pinch to zoom
Retired - Miami Beach Ring
Click or scroll to zoom
Tap or pinch to zoom
Retired - Miami Beach Ring
Retired - Miami Beach Ring

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Miami Beach Ring

PROJECT R1017
Designer: Megan Milliken
Skill Level: Beginner
Make a statement with this dazzling cocktail ring. The iridescent glass button and pink rhinestone chain will be sure to draw some attention!
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Watch the instructional video: How to Use Crystal Clay.
  2. Prepare a piece of white crystal clay and smooth it into the silver tone bezel ring base.
  3. Press the textured iridescent glass button into the center of the bezel until the button shank rests against the bottom of the bezel.
  4. Smooth the clay around the edges of the button, removing any excess.
  5. Cut a piece of light rose silver plated rhinestone chain long enough to fit in the space around the button (about 21 links) and press it into place. Press it down until the rhinestones sit (slightly angled) at the same level as the button. See photos for reference.
  6. Allow the clay to fully cure before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-0126 - Czech Glass, Round Textured Button 22.5mm, 1 Piece, Iridescent
    Project uses 1 piece. You will need 1 package.

  • FRG-0762 - Silver Tone Brass 30mm Round Bezel Adjustable Ring (1)
    Project uses 1 piece. You will need 1 package.

  • CHA-10115 - Czech Crystal Silver Plated Rhinestone Cup Chain 24PP Light Rose (By The Foot)
    Project uses 4 inches. You will need 1 package.

  • TRC-251 - Crystal Clay 2-Part Epoxy Clay Kit 'White' 25 Grams
    Project uses 1 package. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
COLOR Pink
Ingredients FRG-0762, CHA-10115, TRC-251,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: FRG-0762
You will need 1 package(s).
1 package = .
/ Package | SKU: CHA-10115
You will need 1 package(s).
1 package = .
/ Package | SKU: TRC-251
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:
/ Package | SKU: XTL-5600

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Related Products: Design Variations

Sold out
from

You recently viewed

Clear recently viewed