Retired - Sapphire Evening Earrings

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Place a sapphire Czech crystal drop pave bead onto a sterling silver 2", 22 gauge head pin and create a simple wire loop after the bead.
2. Using your flush cutters, clip the head off of another head pin. Create a simple wire loop at the end of the head pin. Then slide a sapphire rainbow Czech crystal round pave bead onto the pin and create another simple loop after the bead.
3. Open one of the loops on the round bead and attach it to the loop on the drop.
4. Open the loop on a sterling silver French wire earring hook and hang the free loop on the round bead from it; close the loop.
5. Enjoy your sparkly new earrings!

• BMB-2965 -
  Project uses 2 pieces. You will need 2 packages.


• FEA-2010 - Sterling Silver French Wire Earring Hooks (10)
  Project uses 2 pieces. You will need 1 package.


• FHP-02320 - Sterling Silver Head Pins 22 Gauge 2 Inches (10)
  Project uses 4 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
• XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
• XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose