Retired - More Cowbell Earrings

Name: Retired - More Cowbell Earrings
Brand: Beadaholique
SKU: E3041
Availability: OutOfStock

Special Value

PROJECT E3041

Designer: Karlin Jones

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Add a little humor to your jewelry collection by making these playful earrings featuring antiqued silver plated cow bell charms that jingle delightfully as you walk.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.

Begin by cutting a 1 inch length of your antiqued silver plated chain, making sure to not have any broken links at the ends.
Next, open up the loop from your antiqued silver earring hook (how you would a jump ring) and slide on the last link from one end of your chain. Close the earring loop back up.
With your chain nose pliers, open up an antiqued silver plated jump ring and slide on the last link from the other end of your chain length. Before closing, also slide on the small loop that is at the top of your cow bell charm and close.
That's it!

WHAT YOU'LL NEED: (scroll down for purchase options)

CHA-9813 - Nunn Design Antiqued Nunn Design Silver Plated Oval Cable Chain 3mm By The Ft
Project uses 2 inches. You will need 1 package.

FEA-3081 - Antiqued Silver Plated French Wire Earring Hooks 16mm (25 Pairs)
Project uses 2 pieces. You will need 1 package.

PND-5824 - Antiqued Silver Plated Small Cow Bell Charms 17.2mm (1)
Project uses 2 pieces. You will need 2 packages.

FJR-3094 - Antiqued Silver Plated Open Jump Rings 6mm 18 Gauge (50)
Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Additional Information

Ingredients

CHA-9813, FJR-3094,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

            
You will need 1 package(s).
1 package = .

             / Package | SKU: CHA-9813

Antiqued Silver Plated Open Jump Rings 6mm 18 Gauge, (50 Pieces)

            Antiqued Silver Plated Open Jump Rings 6mm 18 Gauge, (50 Pieces)
        
You will need 1 package(s).
1 package = Each.

                $3.82
            
             / Package | SKU: FJR-3094