Click or scroll to zoom
Tap or pinch to zoom
Retired - Fashionably Late Cuff
Click or scroll to zoom
Tap or pinch to zoom
Retired - Fashionably Late Cuff
Retired - Fashionably Late Cuff

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Fashionably Late Cuff

Special Value
PROJECT B2214
Designer: Kat Silvia
Skill Level: Beginner
This Nunn Design bezel cuff is simple yet begs to be stack up with several more bracelets for a trendy statement look.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

You will also need a scrap of wire or a toothpick for this project.
  1. Begin by using your flush cutters to cut off a length of cup chain 6 crystals long.
  2. Using a toothpick or a scrap of wire, add a strip of E6000 into the long rectangular channel of the bangle. Place the length of cup chain into the bezel. Move it around so that the cups are evenly spaced.
  3. Place a dab of E6000 into the circle bezel and place a single rhinestone into the bezel. The stone will sit high in the bezel so please make sure that you are using a good size dab of glue.
  4. Allow to dry overnight before wearing.
  5. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-2030 - Austrian crystal Gun Metal Plated Rhinestone Cup Chain 32PP Crystal - BY FT
    Project uses 1 piece. You will need 1 package.

  • JB-2708 - Nunn Design Cuff Bracelet, Rectangle Bezel 28.5mm/Circle Bezel 8mm, 1 Bracelet, Antiqued Silver
    Project uses 1 piece. You will need 1 package.

  • SWF-43000 - Austrian Crystal, Round Flatback Rhinestone SS30 6.5mm, 25 Pieces, Crystal
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients XTL-1054,
Useful Techniques & Learning Guides

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$9.21 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
$31.18 / Package | SKU: XTL-5600

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed