Click or scroll to zoom
Tap or pinch to zoom
Retired - Crystal Spike Earrings
Retired - Crystal Spike Earrings

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Crystal Spike Earrings

Special Value
PROJECT E3066
Designer: Karlin Jones
Skill Level: Beginner
A little bit edgy, a little bit glam; these earrings featuring an Austrian crystal spike pendant and gold plated findings offer the best of both worlds.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the directions below, you will make one earring. Repeat all instructions to make the second earring.
  1. With your chain nose pliers, open a gold plated 8mm jump ring and slide it onto the loop on the bottom of your TierraCast earring stud and also the hole on your Austrian crystal crystal spike pendant. Close the jump ring.
  2. Cut a wire length of 10 inches with your flush cutters.
  3. Take your length of wire and using your fingers, wrap it around the top portion of your Austrian crystal crystal spike pendant as a decorate accent. If you would like a neater look, simply use your pliers for a tight wrap. See photo for assistance.
  4. Lastly, add on your gold tone hypo allergic earring back and you're done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • WNT-2433 - Beadsmith Tarnish Resistant Gold Color Copper Wire 24 Gauge 30 Yards (27.4 Meters)
    Project uses 20 inches. You will need 1 package.

  • FEA-1547 - TierraCast 22K Gold Plated Pewter Stud Post Earrings Beaded Round 11mm (1 Pair)
    Project uses 1 pair. You will need 1 package.

  • FJR-5477 - 22K Gold Plated Open Jump Rings 8mm 20 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • SWCR-6000 - Austrian Crystal, 6480 Spike Pendant 18mm, 1 Piece, Crystal
    Project uses 2 pieces. You will need 2 packages.

  • FEA-1012 - Bullet Clutch Earring Backs, Hypo Allergenic 5.7x5mm, 50 Pieces, Gold Tone
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Boho
Ingredients WNT-2433, FEA-1547, FJR-5477, FEA-1012,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: WNT-2433
You will need 1 package(s).
1 package = .
/ Package | SKU: FEA-1547
You will need 1 package(s).
1 package = .
/ Package | SKU: FJR-5477
You will need 1 package(s).
1 package = .
/ Package | SKU: FEA-1012
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)
$31.18 / Package | SKU: XTL-5600
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
$7.06 / Package | SKU: XTL-5511

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Related Products: Design Variations

Sold out
from

Sold out
from

Sold out
from

You recently viewed

Clear recently viewed