Click or scroll to zoom
Tap or pinch to zoom
Retired - Checkerboard Tila Ring
Click or scroll to zoom
Tap or pinch to zoom
Retired - Checkerboard Tila Ring
Retired - Checkerboard Tila Ring

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Checkerboard Tila Ring

Special Value
PROJECT R612
Designer: Julie Bean
Skill Level: Beginner
This fun ring is a snap to make and will showcase your creativity to all your friends. The only tool required is a scrap piece of wire or a toothpick to smooth out the glue!
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Please find a scrap piece of wire or a toothpick to apply the glue with before beginning this project.
  1. Take a small amount of E6000 glue, and using a toothpick or scrap wire as an applicator, smear the glue on the flat surface of the bezel's interior surface. So that you do not need to rush, only smear it over half of the surface to begin with.
  2. Starting along the edge, begin placing your Tila Beads into the glue in a checkerboard design. See photo.
  3. 5 Tila Beads will fit length wise and 5 will fit width wise in the square ring. A total of 25 Tila Beads will be used in this project.
  4. After you have tiled all the area where glue was present, take your applicator and apply glue to the remaining area.
  5. Finish setting your Tila Beads into the glue.
  6. When all the beads have been placed, pat their tops down with your finger so that all the beads are firmly set into the glue.
  7. Let dry in an upright position overnight.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • DBT-4123 - Miyuki Tila 2 Hole Square Beads 5mm 'Matte Opaque Turquoise AB' 7.2 Grams
    Project uses 12 pieces. You will need 1 package.

  • DBT-457 - Miyuki Tila 2 Hole Square Beads Dark Bronze 7.2 Grams
    Project uses 12 pieces. You will need 1 package.

  • FRG-0857 - Bright Silver Tone Brass Square Bezel Adjustable Ring 26mm (1)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

Additional Information
Theme Summer
Ingredients DBT-4123, DBT-457, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: DBT-4123
You will need 1 package(s).
1 package = .
/ Package | SKU: DBT-457
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$9.21 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed