Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

By following the instructions below, you will make one earring. Repeat all instructions to make the second earring.
  1. This chain is very specific to this design. The smaller hole of the teardrop will always be facing up.
  2. For this project you will need four lengths of chain: 2", 1.5", 1", and 1/2".
  3. With the large end of the teardrops facing down, attach one "x" charm to the bottom of each 1/2" and 1.5" chain lengths.
  4. With the large end of the teardrops facing down, attach one "o" charm to the bottom of each 1" and 2" chain lengths.
  5. Open one 4mm jump ring and attach the top of each chain in this order: 2", 1.5", 1", and 1/2". With all four chains around the loop, add the silver heart earring finding before closing the jump ring.
  6. Add one silver plated earnut backing to the silver plated heart earring post.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-9574 - Lead-Free Pewter, Round Alphabet Charm Lowercase Letter 'x' 13mm, 1 Piece, Silver Plated
    Project uses 4 pieces. You will need 4 packages.

  • PND-9565 - Lead-Free Pewter, Round Alphabet Charm Lowercase Letter 'o' 13mm, 1 Piece, Silver Plated
    Project uses 4 pieces. You will need 4 packages.

  • FEA-1075 - Silver Plated Stud Earring Posts Heart With Loop 6mm (5 Pairs)
    Project uses 2 pieces. You will need 1 package.

  • FEA-1013 - Silver Plated Earring Backs (Earnuts) Med. (100)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

  • CHA-98830 - Silver Plated Teardrop Krinkle Chain 2mm Bulk By The Foot
    Project uses 12 inches. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Ingredients FEA-1075, FEA-1013, FJR-5454, CHA-98830,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Earring Posts, Heart with Loop 6mm, Silver Plated (5 Pairs)
You will need 1 package(s).
1 package = 5 Pairs.
$3.90 / Package | SKU: FEA-1075
Earring Backs, Medium Clutch 6mm, Silver Plated (50 Pairs)
You will need 1 package(s).
1 package = 50 Pairs.
$9.59 / Package | SKU: FEA-1013
Silver Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$2.49 / Package | SKU: FJR-5454
Silver Plated Teardrop Krinkle Chain, 2mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$4.25 / Package | SKU: CHA-98830
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed