Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available,
may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND
OTHER SUPPLIES sections for current availability.
- Cut a piece of Soft Flex beading wire at three inches long. Set aside.
- Thread a silver jump ring through the hole on the small coin pendant, and close the jump ring.
- Thread a brass jump ring through the hole on the brass dog tag and close the jump ring.
- Thread a lava bead onto a headpin, make a simple loop and trim off excess wire. Add a silver jump ring to the loop on that headpin.
- Secure one end of the beading wire with a bead stopper, and onto the wire thread the following: two desert jasper heishe beads, the small coin pendant, three more jasper heishe beads, the brass dog tag, three more jasper heishe beads, the lava bead drop, and two more heishe beads.
- Thread a crimp bead onto the end of the wire, but do not crimp it yet.
- Thread the end of the wire through one of the holes of the flat round textured connector disc, and back through the crimp bead. Crimp the crimp bead, and trim off excess wire on that side.
- To the other hole of the flat round textured connector disc, add a brass jump ring.
- Remove the bead stopper from the other end of the wire and add a crimp bead, but don't crimp yet.
- Thread the wire through a brass jump ring and back through the crimp bead and crimp down.
- Cut sixteen inches of the faux suede cord and onto it thread the remaining brass and silver jump rings.
- Thread one end through one of the brass jump rings on your beaded segment, and thread the other end through the other jump ring at the other end of your beaded segment.
- Bring the ends of your cord back up through the jump rings on the strand, each passing through three jump rings.
- Pull both ends of the cord until the tips are about one inch away from each other.
- Tie each end around itself in a simple knot so that you may make the bracelet adjustable by sliding the knots closer or farther away from each other.
WHAT YOU'LL NEED: (scroll down for purchase options)
- XCR-43105 - Beadsmith Dark Brown Faux Leather Suede Beading Cord 9Ft (3 Yd) Spool
Project uses 16 inches. You will need 1 package.
- SPJA-191 - Paint Brush Desert Jasper 6mm Heishe Beads 15.5 Inch Strand
Project uses 10 pieces. You will need 1 package.
- BMB-3806 - Fine Silver Plated Flat Round Textured 2 Hole Disc Connector Bead 20mm (2)
Project uses 1 piece. You will need 1 package.
- PND-7175 - Vintaj Natural Brass Mini Dog Tag Pendant Charms 24mm (2)
Project uses 1 piece. You will need 1 package.
- PND-5170 - TierraCast Fine Silver Plated Pewter Maldive Larin Coin Charm 9.5mm (2)
Project uses 1 piece. You will need 1 package.
- FCR-1215 - Beadalon Silver Plated Crimp Tubes 2x1.8mm 1.3mm ID (75 Beads)
Project uses 2 pieces. You will need 1 package.
- FJR-5170 - Silver Plated Open Jump Rings 7mm 20 Gauge (x100)
Project uses 4 pieces. You will need 1 package.
- XCR-5493 - Soft Flex, Soft Touch 49 Strand Medium Beading Wire .019 Inch Thick, 30 Feet, Satin Silver
Project uses 3 inches. You will need 1 package.
- FHP-5325 - Silver Plated Head Pins 2 Inches/21 Gauge (X50)
Project uses 1 piece. You will need 1 package.
- FJR-5372 - Vintaj Natural Brass Jump Rings 7.25mm Open 16 Gauge (20)
Project uses 6 pieces. You will need 1 package.
For closed captions/subtitles, click the CC icon on the video player after starting the video.
Earn Reward Points with your purchase of project components or tools.
