Retired - The Golden Compass Necklace

PROJECT N514
Designer: Kathy Mannix
Skill Level: Intermediate
Always find your way while wearing this Vintaj brass and Austrian crystal necklace.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Glue 9 Austrian crystal flatback crystals (SWF-12057) on the inside of the brass spoked gear frame (PND-7129) using a toothpick and a small dab of glue (XTL-1053). Now glue the smaller flatbacks onto the center of the brass gear (See Photo). You have at least 5 minutes to make adjustments before the glue starts to set. For maximum strength bond, allow 24-72 hours for complete curing. Set aside.
  2. Next take the Vintaj brass compass (PND-7011) and gently dap using the wooden dapping set.
  3. Now glue the brass compass onto the front of the brass gear using a small amount of glue. Set aside.
  4. Bend the Vintaj connector (FCO-4627) in half over the smaller part of a pair of bail making pliers (XTL-0031). Cut off both loops in each end of the connector. Use a dab of glue on the inside of the connector at the point. Slide over the finished pendant until it just covers one of the small dots on the front of the compass (See Photo).
  5. Thread one end of the chain (CHA-7195) into the hole of one of the crimp ends (FCR-4202). Squeeze the middle of the crimp tightly with a pair of chain nose pliers. Thread the other end of the chain into the hole of the other crimp end. Squeeze the middle of the crimp tightly with a pair of chain nose pliers. You're finished!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-7011 - Vintaj Natural Brass Sparrow's Compass Pendant Charm 23mm (1)
    Project uses 1 piece. You will need 1 package.

  • PND-7129 - Vintaj Natural Brass Spoked Gear Frame Steampunk Finding 22mm (1)
    Project uses 1 piece. You will need 1 package.

  • FCO-4627 -
    Project uses 1 piece. You will need 1 package.

  • FCR-4202 -
    Project uses 1 piece. You will need 1 package.

  • CHA-7195 -
    Project uses 2 feet. You will need 2 packages.

  • SWF-40901 - Austrian Crystal, Round Flatback Rhinestone SS9 2.5mm, 72 Pieces, Crystal AB Foiled
    Project uses 6 pieces. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-0259 - Domed Wooden Dapping Shaping Forms in Assorted Sizes for Metal
  • XTL-0270 - Eurotool Metalwork Deluxe 7 Hole Wood Block With Steel Block
Additional Information
Theme Vintage Look
Ingredients PND-7129, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: PND-7129
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed