Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Cut all three pieces of ribbon so that they are twenty inches long.
  2. Thread five fire polish beads onto five headpins, create a simple loop and trim off excess wire on each.
  3. Open two jump rings and thread one though the loop at the top of the heart pendant and the other through the hole at the bottom of the pendant.
  4. To the bottom jump ring, add four of the fire polish bead drops. Save the fifth one for the end of your extender chain.
  5. To the top jump ring, add the slider bail. Close both jump rings again.
  6. Thread the three ribbons through the slider bail, so that the pendant hangs in the center.
  7. Making sure the ends of the ribbons line up, curl each end of your necklace tightly, about two times.
  8. Insert each rolled up end of your necklace into each ribbon crimp and gently close. Use nylon jaw pliers, as to not damage the outside of the crimp. For a stronger hold, you may use a dab of E6000 glue on the ends of the ribbon before inserting them into your crimps.
  9. To one of the two crimps, add a single jump ring. To that jump ring, add the heart lobster clasp.
  10. Create an extender chain by linking five jump rings together. Add one end of the chain to the other crimp end.
  11. Finally, add the last fire polish bead drop to the end of the extender chain.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • XCR-46005 - Silk Fabric String, 2mm Diameter, 42 Inches Long, 1 Strand, Garnet Red
    Project uses 20 inches. You will need 1 package.

  • XCR-46016 - Silk Fabric String, 2mm Diameter, 42 Inches Long, 1 Strand, Rose Pink
    Project uses 20 inches. You will need 1 package.

  • XCR-47016 -
    Project uses 20 inches. You will need 1 package.

  • FCL-2551 - 22K Gold Plated Curved Heart Lobster Clasps 12mm (10)
    Project uses 1 piece. You will need 1 package.

  • FCO-4059 - 22K Gold Plated Large Slider Bail Front Ring (10)
    Project uses 1 piece. You will need 1 package.

  • FHP-5221 - 22K Gold Plated Head Pins - 22 Gauge, 2 Inches (X50)
    Project uses 5 pieces. You will need 1 package.

  • FCR-1421 - 22K Gold Plated Ribbon Pinch Crimps Cord Ends 10mm or 3/8 IN. (20)
    Project uses 2 pieces. You will need 1 package.

  • BCP-5738 -
    Project uses 5 pieces. You will need 1 package.

  • BWD-7193 - Purple Heart Wood Laser Cut Scroll Heart Pendant Bead 44mm (1)
    Project uses 1 piece. You will need 1 package.

Additional Information
Theme Valentine's Day
Ingredients FCL-2551, FCO-4059, FHP-5221, FCR-1421,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: FCL-2551
You will need 1 package(s).
1 package = .
/ Package | SKU: FCO-4059
Head Pins, 2 Inches Long and 22 Gauge Thick, 22K Gold Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$5.09 / Package | SKU: FHP-5221
Cord Ends, Ribbon Pinch Crimp 10x5.5mm, Gold Plated (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$4.99 / Package | SKU: FCR-1421
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed