Sky Ferns Bracelet

PROJECT PROJ-PD-B0001
Designer: PRESTIGE Crystal Components
Skill Level: Beginner
This show-stopping bracelet looks incredibly complicated to make but is really quite simple. It's the delicate pattern of the flatback that elevates the design into something truly special.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Feel free to change the pattern of the flatback crystals—have fun! You will also need some toothpicks for this project to use as glue applicators.
  1. Looking at the photo, and using a toothpick, place a dot of E6000 glue where you want to put a flatback on the TierraCast fern leaf focal. Then using your rhinestone pick-up tool, pick up and place a flatback crystal onto the glue. Follow the pattern in the photograph and place each flatback one by one. Do this for all three leaves and let dry overnight.
  2. Place an Olive bead onto an eye pin. Create a simple wire loop right after the Olive bead. Trim excess wire. Create a total of 4 of these.
  3. To connect your bracelet, you will be opening and closing the simple wire loops on the eye pin/crystal combos. You will open and close them just like jump rings. Connect your bracelet in the following order: half a clasp, crystal/eye pin, fern leaf, crystal/eye pin, fern leaf, crystal/eye pin, fern leaf, crystal/eye pin, 2nd half of the clasp. All done. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PRES-2088-SKY16 - PRESTIGE 2088 SS16 Rose Flatback Crystal Sky Ignite
    Project uses 27 piece(s). You will need 27 package(s).

  • PRES-2088-LIN16 - PRESTIGE 2088 SS16 Rose Flatback Crystal Linen Ignite
    Project uses 24 piece(s). You will need 24 package(s).

  • PRES-5044-CGS9 - PRESTIGE Crystal, #5044 Olive Bead 9.5x8mm, Crystal Golden Shadow (1 Piece)
    Project uses 4 piece(s). You will need 4 package(s).

  • FCL-118 - TierraCast Magnetic Clasps, Hammertone 9x18mm, Antiqued Copper Plated (1 Set)
    Project uses 1 piece(s). You will need 1 package(s).

  • FCO-796 - Connector Link, Fern Focal 40mm, Antiqued Copper Plated, by TierraCast (1 Piece)
    Project uses 3 piece(s). You will need 3 package(s).

  • FHP-6233 - Open Eye Pins, 1.5 Inches Long and 22 Gauge Thick, Copper (50 Pieces)
    Project uses 4 piece(s). You will need 1 package(s).

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece(s). You will need 1 package(s).

RECOMMENDED TOOLS:
  • XTL-5032 - The Beadsmith Wire Looping Pliers - Concave And Round Nose
  • XTL-5450 - Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire (1 Piece)
  • XTL-0020 - Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
  • XTL-4004 - The Beadsmith Magical Rhinestone Pick Up Tool With Cleaning Kit - Great For Placing Flatback Rhinestones
Additional Information
Style Bracelet
Theme Special Occasion
Ingredients PRES-2088-SKY16, PRES-2088-LIN16, PRES-5044-CGS9, FCL-118, FCO-796, FHP-6233, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
PRESTIGE Crystal, #2088 Round Flatback Rhinestone SS16, Crystal Sky Ignite, (1 Piece)
You will need 27 package(s).
1 package = 1 Piece.
$0.18 / Package | SKU: PRES-2088-SKY16
PRESTIGE Crystal, #2088 Round Flatback Rhinestone SS16, Crystal Linen Ignite, (1 Piece)
You will need 24 package(s).
1 package = 1 Piece.
$0.18 / Package | SKU: PRES-2088-LIN16
PRESTIGE Crystal, #5044 Olive Bead 9.5x8mm, Crystal Golden Shadow (1 Piece)
You will need 4 package(s).
1 package = 1 Piece.
$1.99 / Package | SKU: PRES-5044-CGS9
You will need 1 package(s).
1 package = .
/ Package | SKU: FCL-118
Connector Link, Fern Focal 40mm, Antiqued Copper Plated, by TierraCast (1 Piece)
You will need 3 package(s).
1 package = 1 Piece.
$3.75 / Package | SKU: FCO-796
Open Eye Pins, 1.5 Inches Long and 22 Gauge Thick, Copper (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$1.39 / Package | SKU: FHP-6233
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Wire Looping Pliers - Concave And Round Nose
Xuron Jeweler's Super Fine Pliers Chain Nose Flat Nose
$25.99 / Package | SKU: XTL-5450
Baby Wubbers Quality Fine Chain Nose Jeweller's Pliers
$32.99 / Package | SKU: XTL-0020

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed