Retired - Roll the Dice Ring

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Based upon what you learned in the video, mix up a large pea size amount of part A and a large pea size amount of part B white Crystal Clay. You will want equal parts of part A and part B. After it is mixed, shape it with your fingers so that it is approximately the size of your bezel ring setting. Place the clay into your bezel setting and smooth into place. You want the clay to be just slightly above the top edge of the bezel. If you need to pinch some off, do so, and then smooth out. Try to get as even and flat of a clay surface as possible.
2. Please look at the photo and place the black chatons in the "five" pip formation for the dice. Use the magical pick to place the chatons and make sure that their edge rests just slightly below the clay surface to hold them in place. Then add the clear chatons around the five pips as seen in the photo.
3. Let cure overnight.

• SWCH-321506 - Austrian Crystal, 1480 Cabochon Chatons pp21, 50 Pieces, Crystal Matte Foiled
  Project uses 32 pieces. You will need 1 package.


• TRC-251 - Crystal Clay 2-Part Epoxy Clay Kit 'White' 25 Grams
  Project uses 1 piece. You will need 1 package.


• BCZ-9210 - Preciosa Czech Crystal Chaton Singles Size 8SS / 17PP - Jet (3g Pack)
  Project uses 5 pieces. You will need 1 package.


• FRG-0857 - Bright Silver Tone Brass Square Bezel Adjustable Ring 26mm (1)
  Project uses 1 piece. You will need 1 package.

• XTL-4004 - Beadsmith Magical Rhinestone Pick Up Tool With Cleaning Kit - Great For Placing Flatback Rhinestones