Retired - Playa Del Rey Bangle Bracelet

Name: Retired - Playa Del Rey Bangle Bracelet
Brand: Beadaholique
SKU: B683
Availability: OutOfStock

PROJECT B683

Designer: Julie Bean

Skill Level: Beginner

Save to Wishlist

Printer Friendly PDF
(if available)

Imagine yourself in a beachy resort town when wearing this eye-catching bangle bracelet. A center row of dazzling rhinestone cup chain 'pops' against a painted jade green background on this fashion-forward accessory.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

You will need a paint brush for this project. I suggest getting a paint brush approximately the width of the channel and with a blunt tip. You will use approximately 9 inches of rhinestone cup chain for this project, however, do not precut your chain, start with the entire 12 inches.

Shake your VIntaj patina bottle well and then squeeze a small amount of paint onto a plastic baggie or plastic paint pallet. Paint an even coat of patina in the inside channel of the bangle bracelet. Make this an even thin coat. Let dry.
Repeat the above step 3 to 5 times until you have a nice opaque layer of paint covering your channel. You do not want to see the metal of the bracelet show through the paint.
Using the fine tip applicator of the GS HypoCement, draw a line of glue 2 inches long down the center of your painted channel. Rest into this glue one end of the rhinestone cup chain and then start laying the length of chain into the glue (flat backside against the glue). Let dry for a few minutes. Starting where you left off, draw another 2 inch glue line. Lay the chain into this glue line and let dry. Work your way all the way around your bangle repeating this process.
When you get to within 1/2 inch of where your chain beginning and end will meet, gauge how many more chain links will fit on your bangle and snip off the excess with flush cutters. Create your last glue line and place your remaining chain links into it. Let dry.
Enjoy!

WHAT YOU'LL NEED: (scroll down for purchase options)

XTL-1001 - G S Hypo Cement Precise Applicator Essential!
Project uses 1 tube. You will need 1 package.

XTL-9065 - Vintaj Patina Opaque Permanent Ink - Jade Green - 0.5 Ounce Bottle
Project uses 1 bottle. You will need 1 package.

CHA-10108 - Czech Crystal Silver Plated Rhinestone Cup Chain 24PP Crystal (By The Foot)
Project uses 9 inches. You will need 1 package.

JB-2662 - Nunn Design Antiqued Silver Plated Round Channel Bangle Bracelet - 2 3/4 Inch
Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:

XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex

Additional Information

Theme	Spring, As Seen In
Ingredients	XTL-1001, XTL-9065, CHA-10108, JB-2662,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

G S Hypo Cement Precise Applicator Essential!

            G S Hypo Cement Precise Applicator Essential!
        
You will need 1 package(s).
1 package = 1 Tube.

                $7.29
            
             / Package | SKU: XTL-1001

            
You will need 1 package(s).
1 package = .

             / Package | SKU: XTL-9065

Preciosa Czech Crystal Rhinestone Cup Chain, 24PP, Crystal/Silver Plated, by the Foot

            Preciosa Czech Crystal Rhinestone Cup Chain, 24PP, Crystal/Silver Plated, by the Foot
        
You will need 1 package(s).
1 package = By the Foot.

                $3.69
            
             / Package | SKU: CHA-10108

            
You will need 1 package(s).
1 package = .

             / Package | SKU: JB-2662

Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Xuron Micro-Shear Flush Cutter Pliers - Cuts Up To 18 Gauge Wire (1mm) Thick, (1 Piece)

$16.85 / Package | SKU: XTL-5600

You recently viewed

Clear recently viewed

0 seconds ago

$1.49

TierraCast Copper Plated Pewter Leaping Frog Charm 20mm (1 pcs)

20% Off | Code: MOM2025

Used in Projects

Made in America

This lead-free pewter charm is plated with genuine Copper in an antiqued finish. Detailed Lucky Leaping Frog Quantity: 1. Measurement: 20mm Loop ...

View full details

1 second ago