Not Just Grandma's Silk Teardrop Earrings (Reboot)

PROJECT E505
Designer: Kathy Mannix
Skill Level: Beginner
There's nothing old fashioned about these Austrian crystal rivoli and brass filigree earrings. Create this project with your favorite 12mm rivoli stone.
Reboot: We have rebooted this project, replacing the discontinued Silk stone used with one featuring a gorgeous Crystal Lavender DeLite LacquerPRO color.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Use your chain nose pliers to slightly bend up 3 corners of the square filigree (PND-7028). (HINT: the square is dapped or indented already so the corners will already be bent slightly upward)
  2. Lay the Rivoli crystal (SWC-9305) face up into the center of the square. It will lay right inside the dapped indentation nicely. Hold the rivoli with your fingers while you bend over 2 of the sides (opposite sides) pressing them gently on top of the rivoli crystal.
  3. Now take the bottom corner with your fingers and gently push it up against the, but not over the rivoli.
  4. Take your chain nose pliers and bend the tip of the bottom corner of the square back down slightly. This will allow you to hang a dangle.
  5. Open a 4mm jump ring (FJR-5347). Link on a filigree charm (PND-7114). Link onto the bottom of the square filigree corner. Close jump ring.
  6. The top corner of your finished piece will easily slide onto the bottom of one of the ear wires (FEA-6650) (see photo)
  7. Repeat the steps above to make the second earring.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-7114 - Vintaj Natural Brass Filigree Teardrop Charms 12mm (2)
    Project uses 2 pieces. You will need 1 package.

  • PND-7028 - Vintaj Natural Brass Square Dapt Filigree Stampings 20mm (2 pcs)
    Project uses 2 pieces. You will need 1 package.

  • FEA-6650 - Vintaj Natural Brass Long Arched Ear Wire 45mm (1 Pair)
    Project uses 2 pieces. You will need 1 package.

  • SWC-9305 - Austrian Crystal, 1122 Rivoli Fancy Stones 12mm, 4 Pieces, Silk Sf
    Project uses 2 pieces. You will need 1 package.

  • FJR-5347 - Vintaj Natural Brass Jump Rings 4.75mm Open 19 Gauge (25)
    Project uses 2 pieces. You will need 1 package.

Additional Information
Theme Bridal
Ingredients FEA-6650, PND-7028, PRES-1122-LAVDE12, FJR-5347, PND-7114,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. Tip: Save this project to your wishlist to easily return to project instructions.
Vintaj Natural Brass Long Arched Ear Wire 45mm (1 Pair)
You will need 1 package(s).
1 package = 1 Pair.
$2.49 / Package | SKU: FEA-6650
Vintaj Natural Brass Square Dapt Filigree Stampings 20mm (2 pcs)
You will need 1 package(s).
1 package = 2 Pieces.
$3.99 / Package | SKU: PND-7028
PRESTIGE Crystal, #1122 Rivoli 12mm, Crystal Lavender DeLite LacquerPRO (1 Piece)
You will need 2 package(s).
1 package = 1 Piece.
$1.49 / Package | SKU: PRES-1122-LAVDE12
Vintaj Natural Brass Jump Rings 4.75mm Open 19 Gauge (25 Pieces)
You will need 1 package(s).
1 package = 25 Pieces.
$2.79 / Package | SKU: FJR-5347
Vintaj Natural Brass Filigree Teardrop Charms 12mm (2 Pieces)
You will need 1 package(s).
1 package = 2 Pieces.
$2.09 / Package | SKU: PND-7114
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed