Retired - Natasha Bracelet

PROJECT B3033
Designer: Karlin Jones
Skill Level: Beginner
Make this striking cuff bracelet in a few simple steps by painting your cuff with black Vintaj patina and adding vintage Lucite pear domed cabochons in Jet Black and Metallic Silver. The sleek, shiny look is quite eye-catching.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

You will also need a paintbrush for this project. Remember to rinse out the brush with water between coats. If you would like to bend the cuff bracelet to adjust the size, be sure to do so before you start. Bending the bracelet after it's been painted and embellished could damage the embellishments.
  1. Begin by painting Vintaj black patina all over the outside of your brass cuff, holding it by the inside. When it dries, hold it by the outside and paint the inside. Then do the edges, one at a time. When you have the entire cuff painted and dried, apply another coat. Apply a third coat if the color is not uniform and opaque. Allow the patina to dry completely between and after coats.
  2. Once the patina is dry, use the tip of your E6000 glue as an applicator, and place a dab of glue onto the outer corner (where your cuff begins) of one side of your cuff bracelet.
  3. Next, place one Jet Black cabochon (with the pointy side facing up) onto the glue, flat side down. Hold it in place for a few seconds and allow it to dry.
  4. Now, add another dab of glue next to the first cabochon that you placed onto the cuff, and now add a Metallic Silver cabochon onto the glue. But this time, invert it so the point is facing down. This will make your cabochons sit closely next to one another.
  5. Continue adding dabs of glue onto your cuff and placing your cabochons on top, remember to alternate between Jet Black and Metallic Silver and also switch over between the placement styles. See photo.
  6. Allow all of the glue to dry thoroughly before wearing.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BCV-324 - Vintage Lucite Plastic Pear Domed Cabochon - Metallic Silver 8.5x13mm (12)
    Project uses 11 pieces. You will need 1 package.

  • BCV-429 - Vintage Lucite Plastic Pear Domed Cabochon - Jet Black 8.5x13mm (12)
    Project uses 12 pieces. You will need 1 package.

  • JB-2570 - Solid Brass Flat Cuff Bracelet Base 12.7mm (0.5 Inch) Wide (1 Piece)
    Project uses 1 piece. You will need 1 package.

  • XTL-9078 - Vintaj Patina Opaque Permanent Ink - Black Onyx - 0.5 Ounce Bottle
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

Additional Information
Ingredients JB-2570, XTL-9078, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Solid Brass Flat Cuff Bracelet Base 12.7mm (0.5 Inch) Wide (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$5.99 / Package | SKU: JB-2570
You will need 1 package(s).
1 package = .
/ Package | SKU: XTL-9078
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed