Retired - Much Ado Earrings in Down the Aisle

PROJECT E1056
Designer: Megan Milliken
Skill Level: Beginner
Simple elegance - make these eye catching earrings in a snap and add some fabulous to any outfit. They'd also be a beautiful compliment to a bridal updo.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Open the jump rings to separate four links of silver plated crystal channel chain, leaving a jump ring on each end.
  2. Place a silver plated 1.5", 22 gauge head pin through an 11mm white teardrop faux pearl and create a wrapped wire loop after the bead.
  3. Open the jump ring on one end of the chain and hang the pearl drop from it; close the ring.
  4. Use a silver plated 4mm, 21 gauge jump ring to hang the other end of the chain from the loop on a silver plated ball post earring. Make sure you have the included jump ring on the chain and a second jump ring here so that the channel chain hangs properly.
  5. Place a silver plated earring back onto the earring post.
  6. Repeat steps 1 - 5 to create a second earring.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-2010 - Austrian crystal Rhodium Plated Channel Crystal Chain Crystal 6.8mm - BY THE FT
    Project uses 1 piece. You will need 1 package.

  • SWP-1101 - Austrian Crystal, 5821 Pear Shaped Faux Pearl Beads 11mm, 4 Pieces, White
    Project uses 2 pieces. You will need 1 package.

  • FEA-1045 - Silver Plated Stud Earrings Ball Post & Ring 4mm (20)
    Project uses 2 pieces. You will need 1 package.

  • FHP-5315 - Silver Plated Head Pins 1.5 Inches Long 22 Gauge Thick (50 Pieces)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5140 - Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100)
    Project uses 2 pieces. You will need 1 package.

  • FEA-1013 - Silver Plated Earring Backs (Earnuts) Med. (100)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Theme Bridal
Ingredients FEA-1045, FHP-5315, FJR-5140, FEA-1013,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Earring Posts, Stud with Ball 4mm, Silver Plated (10 Pairs)
You will need 1 package(s).
1 package = 10 Pairs.
$6.89 / Package | SKU: FEA-1045
Head Pins, 1.5 Inches Long and 22 Gauge Thick, Silver Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$2.69 / Package | SKU: FHP-5315
Silver Plated Open Jump Rings 4mm 21 Gauge Thick (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$2.39 / Package | SKU: FJR-5140
Earring Backs, Medium Clutch 6mm, Silver Plated (50 Pairs)
You will need 1 package(s).
1 package = 50 Pairs.
$9.59 / Package | SKU: FEA-1013
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed