Retired - Jeweled Decadence Cuff

PROJECT B3082
Designer: Karlin Jones
Skill Level: Intermediate
Glittering with facets, this glam cuff bracelet features sparkly cabochons and Czech glass cup chain for a look that is both trendy and a little bit edgy.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Please adjust the size of your raw brass cuff before you add on the embellishments.
  1. Cut the following lengths of black Czech glass cup chain using your flush cutters: four 11 cup long lengths and three 13 cup long lengths. Set aside for now.
  2. Next, referring to the photos often, carefully begin gluing down your faceted cabochons onto the raw brass cuff. Add a dab of E-6000 glue starting at the center and place 1 black 13x18mm cabochon vertically onto the glue.
  3. Add a thin line of glue surrounding the cabochon and carefully wrap a 13 cup long length of black cup chain around the cabochon, placing it on the glue.
  4. Next, glue on a gray 10x14mm cabochon and surround it with a cup chain length that is 11 cups long. See photo for placement assistance.
  5. Continue referring to the photo and mimic my design, remembering to leave enough room around each cabochon for your black cup chain lengths. Glue on the rest of your cabochons and cup chain. See photo,
  6. Once all your components are glued on, set aside to dry.
  7. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • JB-2566 - Solid Brass Domed Cuff Bracelet Base 37mm Wide (1 Piece)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

  • BGL-02012 - Mirror Back Glass Cabochons, 10x14mm Faceted Ovals, 4 Pieces, Light Grey
    Project uses 4 pieces. You will need 1 package.

  • BGL-02004 - Flat Back Glass Cabochons, 13x18mm Faceted Ovals, 4 Pieces, Jet Black
    Project uses 3 pieces. You will need 1 package.

  • CHA-10113 - Czech Crystal Brass Rhinestone Cup Chain 24PP Jet Black (By The Foot)
    Project uses 1 foot. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
Additional Information
Theme Special Occasion
Ingredients JB-2566, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Solid Brass Domed Cuff Bracelet Base 37mm Wide (1 Piece)
You will need 1 package(s).
1 package = 1 Piece.
$7.45 / Package | SKU: JB-2566
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed