Click or scroll to zoom
Tap or pinch to zoom
Retired - Isolde's Guard Ring
Click or scroll to zoom
Tap or pinch to zoom
Retired - Isolde's Guard Ring
Retired - Isolde's Guard Ring

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Isolde's Guard Ring

PROJECT R609
Designer: Esther Lee
Skill Level: Intermediate
Which is a more powerful protector - undying love or a shield? This ring has them both, a beautiful raised heart and a sturdy metal shield are the centerpieces to this striking ring. The perfect ring for a romantic!
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

NOTE: You will need to use your household utility wire cutters for this project. Do not use your good jewelry making cutters, the metal is too strong and will most likely cause permanent damage to them.
  1. Begin this project by putting on your safety goggles, and using your household wire cutters, snip off the button shank as close to the back, flat-side of the button as possible. You will most likely not be able to remove the entire shank, but just part of it.
  2. Using your diamond file, carefully file down the remaining shank remnant on the back of your button. I found it easiest to turn the button upside down and cradle it in a tea towel, this helped me hold onto the button better and also helped with the filing. Keep sanding it down until you have a smooth back side to the button without any remnant of the shank remaining.
  3. Once you have fully filed down the last remnants of the shank, place a dab of E6000 on the flat glue-on tab of the ring. Flip the ring over, center, and press into place on the backside of your button.
  4. Hold in place firmly for 30 seconds and them prop up so that it does not tip over and let dry for several hours.
  5. Enjoy!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FRG-0717 - Nunn Design Antiqued Silver Plated Pewter Round Glue-On Adjustable Ring
    Project uses 1 piece. You will need 1 package.

  • PND-0138 - Antiqued Silver Plated Button Shield With Heart 27.5mm x 17.5mm (1)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-0102 - 10 Piece 4 Inch Precision Diamond Needle File Set
  • XTL-0170 - Eurotool Clear Safety Glasses With Dark Blue Adjustable Frame
Additional Information
Ingredients XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.09 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

10 Piece 4 Inch Precision Diamond Needle File Set
10 Piece 4 Inch Precision Diamond Needle File Set
$13.99 / Package | SKU: XTL-0102

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed