Retired - Hopeful Heart Necklace

Bend the brass diamond trellis filigree stamping (PND-7015) in half using the small part of the bail making pliers (XTL-0031).Align the tips of the filigree bail with the hole of the Austrian crystal heart (SWBB-3753). You will see 2 small holes on the tips of the filigree piece. When you align the filigree, you should be able to see through the large hole of the Austrian crystal heart.Cut a piece of 24 gauge wire (WCR-4224) 6 inches in length. Fold the wire in half. Thread one of the sides of the wire through one of the filigree holes, the Austiran crystal heart, and through the adjacent filigree hole on the other side. Thread the other side of the wire through the other hole of the filigree, the Austrian crystal heart, back through the other side of the adjacent filigree hole. Now twist the wires together, just like a twist tie on a loaf of bread. This will tighten the bail closed over the heart. Cut off excess wire, leaving about an 1/8th of an inch of the twisted wire. Tuck the twisted wire through one of the sides of the filigree hole using your chain nose pliers. Place one of the bead caps (BMB-4696) on top of the 4x4 steel block (XTL-6092). Flatten the bead cap (BMB-4696) with a rubber mallet (XTL-0247). Place a small dap of glue (XTL-1053) on the flattened bead cap. Place the bead cap on top of the filigree bail covering the piece of wire. Glue an Austrian crystal rhinestone (SWF-10904) on top of the bead cap to cover the small hole. Repeat this entire step for the back of the filigree (see photo).Open one of the twisted jump rings (FJR-5395). Link through the one side of the top of the filigree bail. Close jump ring. Repeat these steps with the other twisted jump ring (see photo).Open a plain medium jump ring (FJR-5372). Link through the two twisted jump rings on the bail. Close jump ring.Open the plain large jump ring (FJR-5331). Link through the plain medium jump ring on the assembled piece. Close jump ring.Thread the chain through the plain large jump ring from the assembled piece. Open a plain medium jump ring. Thread through one of the end links of the chain and they clasp (FCL-4656). Close jump ring.Open another plain medium jump ring. Thread through the other end link of the chain. Close jump ring. You're finished!Please refer to photo for more detailed information about this project.