Retired - Heart to Heart Charm Bracelet

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

1. Measure a length of strawberry pink aluminum curb chain 6 1/2" long and use a pair of chain nose pliers to open the next link and remove the length.
2. Use silver plated triangle jump rings to hang vintage acrylic faceted heart pendants from your length of chain at even intervals. Alternate between the jet hearts and the clear hearts.
3. Use silver plated 5mm, 20 gauge jump rings to attach one half of a silver plated 12mm toggle clasp to each end of the chain.

• CHA-91878 -
  Project uses 6 inches. You will need 1 package.


• BCV-06 - Vintage Lucite Plastic Faceted Heart Pendant Bead Jet 17.5x18mm (6)
  Project uses 3 pieces. You will need 1 package.


• BCV-02 - Vintage Clear Lucite Plastic Faceted Heart Pendant Bead 17.5x18mm (6)
  Project uses 3 pieces. You will need 1 package.


• FCL-3032 -
  Project uses 1 piece. You will need 1 package.


• FJR-5150 - Silver Plated Open Jump Rings 5mm 20 Gauge (x100)
  Project uses 2 pieces. You will need 1 package.

• XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose