Retired - Have a Chiyogami Christmas Necklace

PROJECT N129
Designer: Andrea Morici
Skill Level: Intermediate
To make this unique necklace we used Origami paper in festive colors. If you are unable to find Origami paper at your local art supply or stationary store, you may also use Christmas wrapping paper.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. First, choose the paper you would like to use for your project. We used two different patterns of origami paper with red and green floral patterns.
  2. After you have chosen your paper, you must cut it to fit your glass tiles. To do that, lay down your tiles and trace them. Then you must use a sharp pair of scissors or an Exacto knife to cut out the shapes about one to two millimeters inside the lines. We used the bolder pattern, pattern "A", for two of the 7/8" tiles, and for the larger 1 7/8" tile. We used the softer pattern, "B" for the other two tiles.
  3. Using a paint brush, paint a thin layer of Nunn Glue over the entire backside of a clean glass tile, making sure to go all the way to the edge. Flip the tile over and press onto the paper. Smooth the paper out so that there are no air bubbles trapped between the glass and the paper. Let dry fully. Once dry, paint a layer of Nunn Glue over the backside of the image. Let dry fully.
  4. Repeat the above step with all your glass tiles.
  5. Now it is time to glue the bails to the back of your tiles. To do this, you must dab a small amount of E6000 on the back of each bail and position them at the top of each tile, two on each, jutting out horizontally. Allow the E6000 to dry for twenty-four hours.
  6. Once everything on the tiles is dry, connect them using jump rings in this order: jump ring, pattern "A" tile, jump ring, pattern "B" tile, jump ring, large pattern "A" tile, jump ring, pattern "B" tile, jump ring, pattern "A" tile, jump ring.
  7. Cut two pieces of chain at 4 1/2" long, and attach one end of each to a jump ring on either side of the glass tile chain.
  8. To the other end of each piece of chain, add a jump ring.
  9. To one of the jump ring add one half of the toggle clasp, the other half to the other jump ring.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BGL-9024 - Clear Glass Jewelry Pendant Tiles For Craft Pendant Small Squares 7/8 Inch (10)
    Project uses 4 pieces. You will need 1 package.

  • BGL-9022 - Clear Glass Jewelry Pendant Tiles Rectangle 24x48mm (4)
    Project uses 1 piece. You will need 1 package.

  • FCO-4252 - TierraCast Rhodium Plated Pewter Stone Mounting Bails For Cabochon (2)
    Project uses 10 pieces. You will need 5 packages.

  • FJR-5405 - TierraCast Rhodium Plated Brass Open Oval Jump Rings 6mm 20 Gauge (50)
    Project uses 8 pieces. You will need 1 package.

  • CHA-9673 - Antiqued Silver Plated Curb Chain 4mm Bulk By The Foot
    Project uses 1 foot. You will need 1 package.

  • FCL-7008 - TierraCast Rhodium Plated Pewter Hammertone Square Toggle Clasp 23mm (1)
    Project uses 1 piece. You will need 1 package.

  • XTL-1031 - Nunn Design Glue Adhesive 2 oz. - For Patera Findings (1)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

Additional Information
Theme Christmas
Ingredients BGL-9024, FJR-5405, FCL-7008, XTL-1031, XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Clear Glass Jewelry Pendant Tiles For Craft Pendant Small Squares 7/8 Inch (10 pcs)
You will need 1 package(s).
1 package = 10 Pieces.
$4.27 / Package | SKU: BGL-9024
TierraCast Rhodium Plated Brass Open Oval Jump Rings 6mm 20 Gauge (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.97 / Package | SKU: FJR-5405
You will need 1 package(s).
1 package = .
/ Package | SKU: FCL-7008
You will need 1 package(s).
1 package = .
/ Package | SKU: XTL-1031
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed