Click or scroll to zoom
Tap or pinch to zoom
Retired - Guest House Key
Retired - Guest House Key

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

Retired - Guest House Key

PROJECT C632
Designer: Julie Bean
Skill Level: Beginner
A lovely and large ornate key with a striking glass cabochon makes up this beautiful key ring. Imagine how impressive it would be to put a guest key on the ring and hand to a loved one.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Using a toothpick or small piece of wire as an applicator, spread some E6000 glue on the flat backside of the amethyst cabochon. Turn over and place into the bezel setting of the large Patera key. Let dry.
  2. Open your large silver plated jump ring and link it through the hole at the top of the Patera key and also around the side of the key ring. Close the jump ring back up.
  3. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • FCO-8005 - Nunn Design Antiqued Silver Plated Key Ring 1 1/4 Inch (1)
    Project uses 1 piece. You will need 1 package.

  • FJR-2051 - Nunn Design Antiqued Silver Plated Pewter Open Jump Rings 8.5mm 17 Gauge (20)
    Project uses 1 piece. You will need 1 package.

  • PND-6795 - Nunn Design Antiqued Silver Plated Pewter Key Bezel Pendant 73mm /1
    Project uses 1 piece. You will need 1 package.

  • SPCB-1301 - Glass Cabochons - 13mm Round - 'Amethyst' Foiled (4 Pieces)
    Project uses 1 piece. You will need 1 package.

  • XTL-1054 - E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
    Project uses 1 piece. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
Additional Information
Ingredients XTL-1054,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
E6000 Industrial Strength Glue Adhesive (0.18 fl oz)
You will need 1 package(s).
1 package = 1 Piece.
$2.19 / Package | SKU: XTL-1054
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
$6.49 / Package | SKU: XTL-5511

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed