Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Remember to double these instructions to create your matched pair of earrings.
  1. Use a pair of flush cutters to cut a length of silver plated drawn oval cable chain that are each 16 links (about 2", but count the links) long.
  2. Take a 4mm dark sapphire crystal bicone bead and place it onto a silver plated 1", 22 gauge head pin. Make a simple wire loop after the bead. Repeat with three more dark sapphire beads, then with four sapphire beads, then with four light sapphire beads, and then with four crystal beads, for a total of 16 head pins with beads.
  3. Use the simple wire loops to hang one head pin from each link in the length of chain. Hang the head pins each just to the side of the one hanging from the last link so that they hang in a spiral. Start with the dark sapphire beads, then hang the sapphire, then the light sapphire, and then the crystal beads.
  4. Use a 3mm silver plated jump ring to hang the top link (on the darker end) from the ring in a silver plated ball earring post.
  5. Place a silver plated earring back onto the back of the earring post.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • CHA-9816 - Silver Plated Drawn Oval Cable Chain 2.3mm Wide Bulk By The Foot
    Project uses 1 foot. You will need 1 package.

  • FEA-1013 - Silver Plated Earring Backs (Earnuts) Med. (100)
    Project uses 2 pieces. You will need 1 package.

  • FEA-1045 - Silver Plated Stud Earrings Ball Post & Ring 4mm (20)
    Project uses 2 pieces. You will need 1 package.

  • FHP-5314 - Silver Plated Head Pins 1 Inch/22 Gauge (50)
    Project uses 32 pieces. You will need 1 package.

  • FJR-5130 - Silver Plated Open Jump Rings 3mm (x100)
    Project uses 2 pieces. You will need 1 package.

  • SWBI-1400 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Crystal
    Project uses 8 pieces. You will need 1 package.

  • SWBI-14046 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Dark Sapphire
    Project uses 8 pieces. You will need 1 package.

  • SWBI-1427 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Sapphire Blue
    Project uses 8 pieces. You will need 1 package.

  • SWBI-1431 - Austrian Crystal, 5328 Bicone Beads 4mm, 24 Pieces, Light Sapphire
    Project uses 8 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
Additional Information
Theme Winter, Special Occasion, Bridal
Ingredients CHA-9816, FEA-1013, FEA-1045, FHP-5314, FJR-5130,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Silver Plated Drawn Oval Cable Chain, 2.3mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$2.55 / Package | SKU: CHA-9816
Earring Backs, Medium Clutch 6mm, Silver Plated (50 Pairs)
You will need 1 package(s).
1 package = 50 Pairs.
$9.59 / Package | SKU: FEA-1013
Earring Posts, Stud with Ball 4mm, Silver Plated (10 Pairs)
You will need 1 package(s).
1 package = 10 Pairs.
$6.89 / Package | SKU: FEA-1045
Head Pins, Silver Plated, 1 Inch Long and 22 Gauge Thick (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$2.25 / Package | SKU: FHP-5314
Silver Plated Open Jump Rings 3mm (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$6.99 / Package | SKU: FJR-5130
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Wire Looping Pliers - Concave And Round Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed