Retired - Celebrate! Earrings

PROJECT E658
Designer: Julie Bean
Skill Level: Beginner
Featuring gold, silver, crystal, and black, these earrings will go with absolutely everything! The crystal candy pave beads sway from delicate chains as you walk, sparkling brightly and definitely catching the eye.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Remember to double these instructions to make your matched pair of earrings.
  1. Begin by placing each of your beads onto a 1.5", 21 gauge silver plated head pin. Right after each bead, create a simple wire loop using your wire looping pliers. Cut off excess wire with flush cutters.
  2. Next, cut the following lengths of chain: 1", 1.25", and 1.5".
  3. Attach the 1" chain to the 8mm round pave clay bead in crystal via the simple wire loop and latch it onto the wider hole in the end chain link.
  4. Attach the 1.25" chain to the 10mm round pave clay bead in jet via the simple wire loop and latch it onto the wider hole in the end chain link.
  5. Attach the 1.5" chain to the 12mm round pave clay bead in light colorado topaz via the simple wire loop and latch it onto the wider hole in the end chain link.
  6. Open a silver plated 22 gauge 4mm jump ring. Place onto this jump ring the end chain links from all 3 of your dangles above. You will be latching it through the small little hole in each chain link and it will fit if you use a 22 gauge jump ring. Now also place onto it the loop at the base of your long elegant earring hook. Close the jump ring back up.
  7. Have a wonderful time wearing these earrings.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BDLL-6254 - Beadelle Crystal Candy 8mm Round Pave Clay Bead Crystal (1 Piece)
    Project uses 2 pieces. You will need 2 packages.

  • BDLL-6308 -
    Project uses 2 pieces. You will need 2 packages.

  • BDLL-6359 - Beadelle Crystal Candy 12mm Round Pave Bead Light Colorado Topaz (1 Piece)
    Project uses 2 pieces. You will need 2 packages.

  • CHA-98830 - Silver Plated Teardrop Krinkle Chain 2mm Bulk By The Foot
    Project uses 7.5 inches. You will need 1 package.

  • FEA-3025 - Silver Plated Long Elegant Earring Hooks (50)
    Project uses 2 pieces. You will need 1 package.

  • FHP-5323 - Silver Plated Head Pins 1.5 Inches Long/21 Gauge (x50)
    Project uses 6 pieces. You will need 1 package.

  • FJR-5454 - Silver Plated Open Jump Rings 4mm 22 Gauge (50)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
Additional Information
Theme Special Occasion
Ingredients CHA-98830, FEA-3025, FHP-5323, FJR-5454,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Silver Plated Teardrop Krinkle Chain, 2mm, by the Foot
You will need 1 package(s).
1 package = By the Foot.
$4.25 / Package | SKU: CHA-98830
Earring Findings, Long Elegant Hooks 25mm, Silver Plated (25 Pairs)
You will need 1 package(s).
1 package = 25 Pairs.
$7.79 / Package | SKU: FEA-3025
Head Pins, 1.5 Inches Long and 21 Gauge Thick, Silver Plated (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.49 / Package | SKU: FHP-5323
Silver Plated Open Jump Rings 4mm 22 Gauge (50 pcs)
You will need 1 package(s).
1 package = 50 Pieces.
$2.49 / Package | SKU: FJR-5454
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Wire Looping Pliers - Concave And Round Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed