Retired - Candy Stripe Earrings

PROJECT E729
Designer: Julie Bean
Skill Level: Intermediate
These yummy earrings feature a red and white peppermint swirl Golem Studios bead accented by bright silver plated bead caps in fun shapes. The design is whimsical and light-hearted.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Remember to double these directions to make your matched pair of earrings.
  1. Onto a head pin place 1 silver plated small flower bead cap, 1 silver plated daisy bead cap, 1 Golem Studios red and white peppermint swirl bead, another daisy bead cap, and another small flower bead cap.
  2. After the last bead cap, start to create a wrapped wire loop. After you have created the loop but before you make your wraps, insert into the loop the hoop at the base of your stud earring post with ball. Finish making your wraps. Cut off excess wire with flush cutters.
  3. All done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BMB-6404 - Bright Silver Plated Small Flower Bead Caps 6mm (12)
    Project uses 4 pieces. You will need 1 package.

  • BWC-594 - Golem Design Studio Ceramic Beads, 14mm Glazed Round Peppermint Swirl, 2 Pieces, Red/White
    Project uses 2 pieces. You will need 1 package.

  • FHP-3003 - Silver Plated 2mm Ball Head Pins 21 Gauge 3 Inches (x20)
    Project uses 2 pieces. You will need 1 package.

  • FEA-1045 - Silver Plated Stud Earrings Ball Post & Ring 4mm (20)
    Project uses 1 pair. You will need 1 package.

  • FEA-1013 - Silver Plated Earring Backs (Earnuts) Med. (100)
    Project uses 2 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Xuron Sharp Flush Cutter Pliers - Wire/Soft Flex
  • XTL-5032 - Beadsmith Wire Looping Pliers - Concave And Round Nose
Additional Information
Theme Christmas
Ingredients FHP-3003, FEA-1045, FEA-1013,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Head Pins, with Ball Head 3 Inches Long and 21 Gauge Thick, Silver Plated (20 Pieces)
You will need 1 package(s).
1 package = 20 Pieces.
$3.29 / Package | SKU: FHP-3003
Earring Posts, Stud with Ball 4mm, Silver Plated (10 Pairs)
You will need 1 package(s).
1 package = 10 Pairs.
$6.89 / Package | SKU: FEA-1045
Earring Backs, Medium Clutch 6mm, Silver Plated (50 Pairs)
You will need 1 package(s).
1 package = 50 Pairs.
$9.59 / Package | SKU: FEA-1013
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
The Beadsmith Wire Looping Pliers - Concave And Round Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed