Retired - Boho Wrist-to-Ring Bracelet

PROJECT B6006
Designer: Suki Song
Skill Level: Intermediate
This trendy bracelet features glazed ceramic yoga beads and an elegant, gold chain. Perfect for a modern, yoga-inspired look!
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

This bracelet measures 3 inches from the hamsa bead to the scarab bead. The sizing of this project varies on your preference. If you'd like it to be loose, or larger, keep in mind to purchase extra chain in case.
  1. You will begin by cutting the following lengths of chain with your flush cutters. To make these instructions easier to follow, I have assigned each chain length with a letter.
  2. A = 1.5"
  3. B = 1"
  4. C = 1"
  5. D = 1"
  6. E = 1"
  7. F = 1"
  8. G = 3.5"
  9. H = 3.5"
  10. I = 1 3/4"
  11. J = 1 3/4"
  12. K = .5"
  13. L = .5"
  14. M = 3"
  15. Set your chain lengths aside for now.
  16. You will now begin the process of attaching all your chain lengths via jump rings. I will explain my instructions with the chain laying flat on my work space and going from left to right.
  17. With your chain nose pliers, open a 5mm jump ring and slide on another 5mm jump ring and close. Repeat this process until you have five 5mm jump rings linked to one another. (link)
  18. Next, open a 3mm jump ring and slide it onto the last 5mm jump ring. Also slide on the last link from one end of a 1.5" chain length (A).
  19. Open up another 3mm jump ring and slide it onto the last link on the opposite side of that same length of A chain. Before closing, slide on the last link from one side of chain B. Close the jump ring.
  20. Open up another 3mm jump ring and slide it onto the last link on that same length of B chain. Before closing, slide on the last link from one side of chain C. Close the jump ring.
  21. Take one gold plated eye-pin and string on the scarab bead. Secure it by creating a simple wire loop. Repeat this with the other two beads, and then set aside.
  22. Open the simple loop on your scarab bead (how you would a jump ring) and slide on the last link from one side of your chain length D and also the last link from one side of your chain length E. Close the jump ring.
  23. Open a 5mm jump ring and dlid on the last link from the other side of your chain length E and close.
  24. Open another 5mm jump ring and slide it onto the last link from the other side of your chain length E and the last link from one side of chain length F and close.
  25. Open a 5mm jump ring and slide it onto the last link from the other side of chain length F. Before closing, also slide on the loop from your gold plated lobster clasp and close.
  26. Now you will connect the last link from one end of chain length G (3.5") onto the jump ring connecting chains A and B.
  27. Connect chain length I (1 3/4") onto the jump ring connecting chains B and C.
  28. Connect chain length K (.5") onto the simple wire loop on the bottom of the scarab bead.
  29. Connect chain length J (1 3/4") onto the jump ring connecting lengths D and E.
  30. Connect chain length H (3.5") onto jump ring connecting E and F.
  31. Take the ohm bead, open the simple wire loop (how you would a jump ring), and string on the remaining ends of lengths J, K, and I.
  32. Take length L and connect it to the bottom of the ohm bead.
  33. Use the simple wire loop at the bottom of the hamsa hand bead and connect the remaining ends of lengths G, L, and H onto it.
  34. Finally, connect both ends of length M onto the remaining simple wire loop on the hamsa hand bead, completing your bracelet and creating the ring.
  35. You're all done!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • BWC-3059 - High Fired Glazed Ceramic Beads - Small Scarab Beetle 14.5x12.5mm- Pack of 2
    Project uses 1 piece. You will need 1 package.

  • CHA-2401 - 22K Gold Plated 1.8mm X 2mm Cable Chain - By The Foot
    Project uses 3 feet. You will need 3 packages.

  • BWC-3036 - High Fire Ceramic Bead - Hamsa Hand 11x14mm (2)
    Project uses 1 piece. You will need 1 package.

  • BWC-3045 - High Fire Ceramic Bead - Aum Hindu Yoga 13mm (2)
    Project uses 1 piece. You will need 1 package.

  • FHP-6256 - 22K Gold Plated Open Eye Pins 22 Gauge 1 Inch (x50)
    Project uses 3 pieces. You will need 1 package.

  • FJR-5230 - 22K Gold Plated Open Jump Rings 3mm 22 Gauge (x100)
    Project uses 5 pieces. You will need 1 package.

  • FCL-4720 - 22K Gold Plated Curved Lobster Clasps 10mm (6)
    Project uses 1 piece. You will need 1 package.

  • FJR-5250 - 22K Gold Plated Open Jump Rings 5mm 20 Gauge (100)
    Project uses 6 pieces. You will need 1 package.

RECOMMENDED TOOLS:
  • XTL-5511 - Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose
  • XTL-5600 - Sharp Flush Cutter Pliers - For Cutting Beading Wire, 1 Piece
Additional Information
Theme Yoga, Boho
Ingredients CHA-2401, FHP-6256, FJR-5230, FCL-4720, FJR-5250,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
22K Gold Plated Cable Chain, 1.8mm, by the Foot
You will need 3 package(s).
1 package = By the Foot.
$3.99 / Package | SKU: CHA-2401
You will need 1 package(s).
1 package = .
/ Package | SKU: FHP-6256
22K Gold Plated Open Jump Rings 3mm 22 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$7.29 / Package | SKU: FJR-5230
Lobster Clasps, Curve 10mm, 22K Gold Plated (6 Pieces)
You will need 1 package(s).
1 package = 6 Pieces.
$4.99 / Package | SKU: FCL-4720
22K Gold Plated Open Jump Rings 5mm 20 Gauge (100 pcs)
You will need 1 package(s).
1 package = 100 Pieces.
$4.94 / Package | SKU: FJR-5250
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

The Beadsmith Jeweller's Micro Pliers Chain Nose Flat Nose

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed