Retired - Autumn Sunshine Necklace

PROJECT N510
Designer: Kathy Mannix
Skill Level: Intermediate
It's a pretty 'transparent' Austrian crystal and filigree necklace.
Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

  1. Open one of the small jump rings (FJR-3045). Link the jump ring onto the left side loop of the gold leaf connector (FCO-3472) and to the hole at the left side of the widest point of the brown filigree stamping (PND-00087). Close the jump ring.
  2. Open the other small jump ring and link onto the right side of the gold leaf connector and through the hole on the right side of the filigree at the widest point. Close the jump ring. (see photo)
  3. Open the leaf bail (FCO-3062) with your chain nose pliers just enough so you can fit it over the top of the Austrian crystal crystal (SWC-9911) without it scraping it. Align the small prongs inside the bail over the hole in the pendant and the hole at the top of the brown filigree piece. Gently squeeze the bail closed with your fingers. You can also use a pair of nylon chain nose pliers to make sure it is snug. Do not press too hard, to avoid damaging the crystal.
  4. Thread the gold plated chain (CHA-9814) through the large hole at the top of the leaf bail.
  5. Open a small jump ring. Link the jump ring onto loop of the spring ring (FCL-1571) and to the end of the chain. Close the jump ring.
  6. Open the larger jump ring (FJR-3055). Link the jump ring to the other end of the chain and to the loop of the small leaf charm (PND-5440). Close the jump ring. You're finished!
WHAT YOU'LL NEED: (scroll down for purchase options)
  • PND-00087 -
    Project uses 1 piece. You will need 1 package.

  • FCO-3472 - Nunn Design Antiqued 24kt Gold Plated Pewter Fern Connector Bar 33mm (1)
    Project uses 1 piece. You will need 1 package.

  • SWC-9911 -
    Project uses 1 piece. You will need 1 package.

  • PND-5440 - TierraCast 22K Gold Plated Pewter Tiny Oak Leaf Charm 10.5mm (4)
    Project uses 1 piece. You will need 1 package.

  • CHA-9814 - Nunn Design Antiqued Gold Plated Oval Cable Chain 3mm By The Foot
    Project uses 18 inches. You will need 2 packages.

  • FJR-03045 - 14K Gold Filled Open Jump Rings 4mm 21 Gauge (10)
    Project uses 3 pieces. You will need 1 package.

  • FJR-03055 - 14K Gold Filled Open Jump Rings 5mm 21 Gauge (10)
    Project uses 1 piece. You will need 1 package.

  • FCL-1571 - 22K Gold Plated Spring Ring Clasps 7mm (25)
    Project uses 1 piece. You will need 1 package.

Additional Information
Theme Vintage Look, Special Occasion, Bridal
Ingredients PND-5440, CHA-9814, FJR-03045, FJR-03055,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
You will need 1 package(s).
1 package = .
/ Package | SKU: PND-5440
Nunn Design Antiqued Gold Plated Oval Cable Chain, 2.3mm, by the Foot
You will need 2 package(s).
1 package = By the Foot.
$4.17 / Package | SKU: CHA-9814
14K Gold-Filled Open Jump Rings 4mm 21 Gauge (10 pcs)
You will need 1 package(s).
1 package = 10 Pieces.
$7.29 / Package | SKU: FJR-03045
14K Gold-Filled Open Jump Rings 5mm 21 Gauge (10 pcs)
You will need 1 package(s).
1 package = 10 Pieces.
$9.99 / Package | SKU: FJR-03055
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Featured New Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed