Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

Cut off a piece of wire (WCR-4226) 8 inches in length. Thread a Cubic Zirconia briolette (SPCZ-213) onto the wire. Wire wrap the briolette using the briolette wire wrapping technique. Set aside.Cut off a piece of wire 6 inches long. Thread on a Cubic Zirconia briolette (SPCZ-363) to the wire. Wire wrap the briolette using the briolette wire wrapping technique from before. Set aside.Thread one of the CZ rondelles onto a headpin. Wire wrap a loop. Cut off excess wire. Set aside.Open the large jump ring (FJR-5395). Link the jump ring onto the small rondelle cz dangle, the larger briolette cz, and the small briolette cz in that order. Close the jump ring.Open one of the smaller jump rings (FJR-5347). Link onto the larger jump ring with the dangles and another small jump ring. Close the jump ring. Open the bottom loop of the leverback earring (FEA-6014). Link on the entire assembled earring part by the last small jump ring. Close the loop. You�re finished!Repeat the steps above to make the second earring. Remember to make a mirror image pair by turning the assembled earring dangle around before you hang it onto the bottom loop of the leverback earring.Please refer to photo for more detailed information about this project.
WHAT YOU'LL NEED: (scroll down for purchase options)
  • SPCZ-213 -
    Project uses 2 pieces. You will need 1 package.

  • SPCZ-363 -
    Project uses 2 pieces. You will need 1 package.

  • SPCZ-201 -
    Project uses 2 pieces. You will need 1 package.

  • FEA-6014 - Antiqued Brass Earrings Leverbacks With Shell (5 Pairs)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5395 - Vintaj Natural Brass Etched Jump Rings 9.5mm Heavy 14 Gauge (10)
    Project uses 2 pieces. You will need 1 package.

  • FJR-5347 - Vintaj Natural Brass Jump Rings 4.75mm Open 19 Gauge (25)
    Project uses 4 pieces. You will need 1 package.

  • WCR-4349 - Vintaj Brass Bronze Colored Copper Wire 26 Gauge 120 Feet (1 Spool)
    Project uses 3 feet. You will need 1 package.

  • FHP-6311 - Antiqued Brass Head Pins 1.5 Inches / 22 Gauge (X50)
    Project uses 2 pieces. You will need 1 package.

Additional Information
Theme Autumn
Ingredients FJR-5395, FJR-5347, FHP-6311,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.
Vintaj Jump Rings, Open 9.5mm Diameter 14 Gauge with Etched Surface Natural Brass (10 Pieces)
You will need 1 package(s).
1 package = 10 Pieces.
$3.39 / Package | SKU: FJR-5395
Vintaj Natural Brass Jump Rings 4.75mm Open 19 Gauge (25 Pieces)
You will need 1 package(s).
1 package = 25 Pieces.
$2.79 / Package | SKU: FJR-5347
Head Pins, 1.5 Inches Long and 22 Gauge Thick, Antiqued Brass (50 Pieces)
You will need 1 package(s).
1 package = 50 Pieces.
$3.89 / Package | SKU: FHP-6311
Earn Reward Points Earn Reward Points with your purchase of project components or tools.

Tools and Other Supplies:

Related Video [VIEW ALL VIDEOS]

Accessible Options For closed captions/subtitles, click the CC icon on the video player after starting the video.

You recently viewed

Clear recently viewed