Alpine Bracelet (Retired)

Name: Alpine Bracelet (Retired)
Brand: Beadaholique
SKU: B7012
Availability: OutOfStock

PROJECT B7012

Designer: Rachel Zaimont

Skill Level: Intermediate

Save to Wishlist

Printer Friendly PDF
(if available)

Channel your outdoorsy side with this unisex macrame bracelet featuring a nature-themed TierraCast button closure.

Instructions

Note: Components and tools listed within this INSTRUCTIONS box and the printer-friendly PDF, if available, may have been discontinued since this project was published. Refer to the PURCHASE COMPONENTS and TOOLS AND OTHER SUPPLIES sections for current availability.

These instructions will make a 7 1/2 inch bracelet, but you will have lots of leftover cord at the end in case you want to change the size. To make the bracelet bigger or smaller, simply adjust the length of the beaded section.

Cut two 8-foot strands of cord.
Fold the cords in half, align all four ends and find the center of the two cords. Tie an overhand knot to create a loop about 3/4 of an inch across -- this loop will form half of your button closure later.
The first stitch will be the hardest. Hold your knot and separate your four strands so they lie facing each direction -- one up, one down, one right and one left. Please watch our video on how to do a box knot to learn how to start stitching your bracelet.
Continue box stitching without beads for half an inch.
Next, watch our video on how to do box knotting with beads. Add a bead to all four strands and make a stitch. Pull tight.
Do another stitch without beads. Alternate stitches: one with beads, one without, for five inches.
Then continue stitching without beads for another half an inch.
Make an overhand knot as close to your stitch work as you can. Take two of the cord ends and string the loop of your button. Then join all four cord ends and make another overhand knot as close to the button shank as you can, adding in a few drops of Hypo-Cement before pulling the knot tight.
Cut off the excess cord about 1/4 inch from the knot. Dab more Hypo-Cement on the cord tips to prevent fraying.
Slip the button through the loop on the other end that you tied in the beginning, closing the bracelet. All done!

WHAT YOU'LL NEED: (scroll down for purchase options)

XCR-0402 - Lovely Knots - Asian Knotting Cord 1mm Thick - Lt Chocolate (50 Yards On Bobbin)
Project uses 16 feet. You will need 1 package.

JSF-0361 - Toho Round Seed Beads 6/0 Y310 - Hybrid Sour Apple Picasso (8 Grams)
Project uses 1 tube. You will need 1 package.

PND-5687 - TierraCast Antiqued Silver Plated Pewter Tree Of Life Button 15.5mm (2)
Project uses 1 piece. You will need 1 package.

XTL-1001 - G S Hypo Cement Precise Applicator Essential!
Project uses 1 piece. You will need 1 package.

Additional Information

Ingredients

XCR-0402, PND-5687, XTL-1001,

Purchase Components

Purchase the components needed to make this project. Change quantities as needed to make multiple pieces. This project is RETIRED. Please review project instructions carefully—some items may no longer be available for this project and will not be listed below. Tip: Save this project to your wishlist to easily return to project instructions.

Lovely Knots - Asian Knotting Cord 1mm Thick - Lt Chocolate (50 Yards On Bobbin)

            Lovely Knots - Asian Knotting Cord 1mm Thick - Lt Chocolate (50 Yards On Bobbin)
        
You will need 1 package(s).
1 package = 1 Spool.

                $7.55
            
             / Package | SKU: XCR-0402

Sold out

TierraCast Antiqued Silver Plated Pewter Tree Of Life Button 15.5mm (2 Pieces)

            TierraCast Antiqued Silver Plated Pewter Tree Of Life Button 15.5mm (2 Pieces)
        
You will need 1 package(s).
1 package = 2 Pieces.

                $3.85
            
             / Package | SKU: PND-5687

Sold out

G S Hypo Cement Precise Applicator Essential!

            G S Hypo Cement Precise Applicator Essential!
        
You will need 1 package(s).
1 package = 1 Tube.

                $7.29
            
             / Package | SKU: XTL-1001